- RS-stocknr.:
- 899-8132
- Fabrikantnummer:
- TG 1250-0.1FN
- Fabrikant:
- Sauter
- RS-stocknr.:
- 899-8132
- Fabrikantnummer:
- TG 1250-0.1FN
- Fabrikant:
- Sauter
Wetgeving en conformiteit
- Land van herkomst:
- CN
Productomschrijving
Sauter Coating Thickness Meter
The Sauter digital coating thickness meter is a premium thickness measuring device for paint coatings, lacquer coatings, etc. It has an external sensor that plugs into the meter housing with a maximum measuring range of 100μm x 1250μm. It is designed for use on ferrous and non-ferrous materials. The offset-occur function allows adjusting the instrument precisely on the locally measured range by 2-point calibration.
Supplied with:
Software
Interface Cable
Hard Storage Case.
Supplied with:
Software
Interface Cable
Hard Storage Case.
Features and Benefits
Minimal base thickness is 0.3mm
Auto power OFF function
Base plate and calibration foil included
External measuring heads for F and N measurements
External sensor
Back-lit LCD
Internal memory up to 99 values
Minimal base thickness of 300μm
Offset accuracy of 1%
RS-232 data interface
Scan mode
Selectable measuring units such as μm and mil
Operating temperature ranges between 0°C and 50°C
Auto power OFF function
Base plate and calibration foil included
External measuring heads for F and N measurements
External sensor
Back-lit LCD
Internal memory up to 99 values
Minimal base thickness of 300μm
Offset accuracy of 1%
RS-232 data interface
Scan mode
Selectable measuring units such as μm and mil
Operating temperature ranges between 0°C and 50°C
Specificaties
Kenmerk | Waarde |
---|---|
Accuracy | 1 % |
Maximum Measurement | 1250µm |