Sauter TC 1250-0.1 FN-car Thickness Gauge, 100μm - 1250μm, ±2.5 μm Accuracy, 0.1 μm Resolution, Digital Display

  • RS-stocknr. 660-8149
  • Fabrikantnummer TC 1250-0.1 FN-car
  • Fabrikant Sauter
Datasheets
Wetgeving en conformiteit
Vrijgesteld
Land van herkomst: CN
Productomschrijving

TC 1250 Series Layer Measurement Device

Digital layer thickness measurement device
RS232 interface possible with optional accessory ATC-01 RS 685-0959
Measurement range of up to 1250 μm, can be switched between μm and inches
0.1 μm resolution in fine range, 1 μm in coarse range → 100 μm
Measurement accuracy: standard 3% of measured value
With offset accuracy function calibration in concrete measurement range for improving accuracy to 1%
Dimensions: L x W x H: 131 x 65 x 28 mm
Weight: 81 g

Supplied with

4 x 1.5 V AAA batteries, zero test plate and spacer film for accurate setting, calibration block, wrist lanyard and carrying case

Specificaties
Kenmerk Waarde
Resolution 0.1 μm
Accuracy ±2.5 μm
Display Type Digital
Dimensions 131 x 65 x 28mm
Battery Type AAA
Height 28mm
Length 131mm
Maximum Measurement 1250µm
Model Number p TC 1250-0.1 FN-car
Minimum Measurement 100µm
Weight 81g
Width 65mm
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
493,50
(excl. BTW)
597,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
493,50 €
Related Products
The C.A 852 digital pressure gauge was specially ...
Description:
The C.A 852 digital pressure gauge was specially designed for environmental engineering. It measures relative and differential pressures.Large backlit display for perfect visibility of measurements.Measurement range -2 → +2 psi.Pressure units: psi, bar, mbar, inH2O, mmH2O.Time-stamped monitoring of MIN and ...
Turnable display with backlightDigital force gauge with remote ...
Description:
Turnable display with backlightDigital force gauge with remote sensorData interface RS-232Selectable measuring units:N, lb, kg, kN, tReal time or Peak Hold Mode to observe transients or capture peaksFunction to set limits, programming of Max./Min., in pull and push direction, with ...
This professional height gauge comes with a built ...
Description:
This professional height gauge comes with a built in Absolute encoder that doesn’t need its reference point to be set every time it’s turned on. Reliability is further improved because over speed errors cannot happen. It features a comfortable base, ...
A double column digital electronic height gauge, with ...
Description:
A double column digital electronic height gauge, with a clear 8mm high LCD display. Ideal for quality control inspection, workshop or production use where SPC functionality is not required. Large handwheel for fast and fine height adjustmentInch/metric conversionColumn locking leverRelative ...