Reliance Brass Ausimix Thermostatic Mixing Valve, 15mm

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: AU
Productomschrijving

Ausimix TMV2 & TMV3 Thermostatic Mixing Valves

Dual approval TMV2 and TMV3 for complete flexibility
Rapid failsafe on eiter hot or cold supply failure
Provides stable mixed water temperature
Complies with Part G and NHS MES D08 specification
Flat faced union connections for ease of maintenance
Unique temperature adjustment tool incorporated into the cap
Body and fittings: DZR Brass, Nickel plated
Seals: Viton
Spring: Stainless steel
Strainers: Stainless steel
Washers: Tesnit

Note

Reliance Water Control’s Ausimix is a thermostatic mixing valve approved for both the TMV2 and TMV3 schemes making this valve suitable for healthcare, domestic and commercial/general public use

Standards

BSEN 1111, BS 7942, NHS MES D08

Approvals

WRAS, TMV2 and TMV3

Basin, Bath & Shower Valves

A range of thermostatically controlled mixer valves all capable of operating with a hot/cold or cold/hot pressure ratio imbalance of up to 10:1,All units incorporate check valves to prevent cross-flow between supplies, and strainers to reduce damage due to contamination.,Connections are via the compression fixings using either 15 or 22mm pipe.

Specificaties
Kenmerk Waarde
Connection 15 mm
Body Material Brass
Maximum Working Pressure 16 bar
Connection Size 15mm
Maximum Set Temperature +46°C
Minimum Set Temperature +38°C
Temperature Setting Range +38 → +46 °C
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
95,47
(excl. BTW)
115,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
95,47 €
Related Products
High quality brass valves. Manufactured in accordance with ...
Description:
High quality brass valves. Manufactured in accordance with BS5154 series BCompression ends are in accordance with BS864: part 2 (based on PN20), 5 bar at 120°C (hot)Solid taper wedge and non-rising spindleAsbestos-free gland packing, replaceable whilst in serviceSuitable for water ...
Chromium plated brass, all components WRC listedPressure rating ...
Description:
Chromium plated brass, all components WRC listedPressure rating 16 bar at 30°C, 10 bar at 65°C, 6 bar at 110°C (test 20 bar)Straight and tee pattern quarter turn isolating valves for use on hot and cold water systemsFlow rate 0.16 ...
Hot pressed, nickel plated brass ball valves, approved ...
Description:
Hot pressed, nickel plated brass ball valves, approved to BG technology standards. Suitable for gas at low pressures (according to the British Gas list) and for the distribution of natural gas, LPG and propane/air or propane/butane mixtures. Maximum Working Pressure ...
A 240V two port zone valve for use ...
Description:
A 240V two port zone valve for use in heating systems to isolate zones or equipment. Powered open with spring return. Easy to use, clip-on detachable headPre-moulded plug and play cable supplied to connect to motorised headMetal manual operating lever ...