RS PRO Thermistor 50Ω, 10 (Dia.) x 5mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS Pro Inrush Current Suppressors

A range of PCB mounting metal oxide ceramic inrush current suppressors which when cold at initial switch on, present a high series resistance and limit current flow
As the devices warm the resistance progressively reduces to allow normal current to flow
The device quickly cools and returns to high resistance when the power is switched off
Suitable for switched mode power supplies, small electric motors, filament lamps, transformers etc

Caution

These suppressors are designed to run at elevated temperatures and need to be hot to achieve low continuous operating resistance. It is therefore important to allow for this when installing them in the circuitry.

Specificaties
Kenmerk Waarde
Temperature Coefficient Type NTC
Thermal Time Constant 58s
Resistance @ 25 °C 50 Ω
Tolerance ±20%
Application Protection
Depth 5mm
Dimensions 10 (Dia.) x 5mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +170°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08/07/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 100)
0,386
(excl. BTW)
0,467
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
100 - 900
0,386 €
38,60 €
1000 - 2400
0,348 €
34,80 €
2500 - 4900
0,313 €
31,30 €
5000 - 9900
0,282 €
28,20 €
10000 +
0,254 €
25,40 €
*prijsindicatie
Related Products
Positive temperature coefficient Thermistor is designed for general ...
Description:
Positive temperature coefficient Thermistor is designed for general purpose over-current, over-voltage, and direct over temperature protection. Applications in TV tube degaussing, choke and transformer protection, time delay, motor starting, liquid level sensors and overflow protection for oil tanks. Protection ...
Brought to you under the trusted RS Brand, ...
Description:
Brought to you under the trusted RS Brand, these R-T curve (Resistance-Temperature) matched thermistors are small, high quality, epoxy encapsulated, precision devices. These epoxy coated interchangeable chip thermistors offer true interchangeability over wide temperature ranges, permitting the circuit designer to ...
NTC Thermistors, Standard Lug Sensors, 150 °C. FEATURES150 ...
Description:
NTC Thermistors, Standard Lug Sensors, 150 °C. FEATURES150 °C long term stability (5000 h dry heat)Easy mounting using ring tongue terminalRugged constructionAPPLICATIONSSuitable for surface sensing applications, especially when a good electrical insulation and a good thermal contact with the chassis ...
These thermistors have a negative temperature coefficient. The ...
Description:
These thermistors have a negative temperature coefficient. The part consists of a NTC chip, soldered between two tin plated copper wires. It has a gray base coating and is color band coded. The coating has no specified insulation properties. • ...