+134°C 1 4 A Thermal Fuse, Panasonic, 250V ac

  • RS-stocknr. 712-7301
  • Fabrikantnummer EYP1BF134
  • Fabrikant Panasonic
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

Panasonic Thermal Cutoffs EYP F Series

Panasonic Thermal Cutoffs (TCO) are compact and insulated, featuring quick temperature response, and mountable in a small space without insulation or protection. Panasonic TCO open reliably when the equipment becomes abnormal, and are not resettable.

PCB Wire Ended

Thermal fuses protect equipment against fire or thermal damage due to overload or overcharge. Suitable for use with standard single phase supplies up to 250V (230V typical). Temperature gradient: 1°C per minute.

Specificaties
Kenmerk Waarde
Functioning Temperature +134°C
Holding Temperature +105°C
Maximum Current 4 A
Voltage Rating 250 V ac
Lead Orientation Axial
Body Diameter 2.2mm
Body Height 6mm
Body Length 6mm
Wire Diameter 0.53mm
Wire Length 38mm
130 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
57820 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,29
(excl. BTW)
0,35
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
0,29 €
2,90 €
50 +
0,269 €
2,69 €
*prijsindicatie
Related Products
Fuses with very high breaking capacity to protect ...
Description:
Fuses with very high breaking capacity to protect power semi-conductors and electronic switching devices.Connection in accordance with British standard BS88-4.Version without striker.
Low let through currentLow quenching timeLow quenching I2t ...
Description:
Low let through currentLow quenching timeLow quenching I2t valueLow excess voltage valueLow thermal load on fuse and holderSuitable for 3-phase applications.
Low let through currentLow quenching timeLow quenching I²t ...
Description:
Low let through currentLow quenching timeLow quenching I²t valueLow excess voltage valueLow thermal load on fuse and holderBreaking capacity 50kA at 500VacSuitable for 3-phase applications.
Thermal fuses protect equipment against fire or thermal ...
Description:
Thermal fuses protect equipment against fire or thermal damage due to overload or overcharge. Suitable for use with standard single phase supplies up to 250V (230V typical). Temperature gradient: 1°C per minute. Latches in a tripped state if used with ...