nVent-Schroff Test Connector Adapter With Copper contacts and Gold Plated

  • RS-stocknr. 260-9053
  • Fabrikantnummer 23021657
  • Fabrikant Schroff
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Eurocard test adapter in accordance with DIN 41612

Test adapter with printed circuit boards made from epoxy glass-reinforced laminate EP-GC02, in accordance with DIN 40802 (FR4)
For cards up to 3 HE in height (100 mm)

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

Specificaties
Kenmerk Waarde
Contact Material Copper
Contact Plating Gold
9 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
219,41
(excl. BTW)
265,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
219,41 €
5 +
208,45 €
Related Products
Hirschmann Test and Measurementt PKI 10 A Au, ...
Description:
Hirschmann Test and Measurementt PKI 10 A Au, CAT I 4mm gold plated chassis mount test sockets with pole clamp-claw edge and a captive insulated head and insulated ring, 2mm cross hole and M4 termination thread. These PKI 10 A ...
Binding posts designed to mount in panels between ...
Description:
Binding posts designed to mount in panels between 1.77-6.35mm thick, and accepts standard 4mm banana plugs, spade lugs & bare wire. Constructed from a copper or gold plated tellurium copper body with a polycarbonate insulatorSuitable for hands free testing up ...
Binding posts designed to mount in panels between ...
Description:
Binding posts designed to mount in panels between 1.77-6.35mm thick, and accepts standard 4mm banana plugs, spade lugs & bare wire. Constructed from a copper or gold plated tellurium copper body with a polycarbonate insulatorSuitable for hands free testing up ...
A series of Abbatron Smith insulated binding posts ...
Description:
A series of Abbatron Smith insulated binding posts with insulated plastic head. All are machined of the best materials and inspected. Have sufficient spring tension which assures great holding power and minimum contact resistance. Unsinulated versions are also available: 914-1087. ...