CEP, End Plate for use with CDU, CTR

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

Spring Loaded Screw Clamp Terminal Blocks

DIN Rail mounted spring loaded screw terminal blocks have a spring under the cable clamp that provides a secure contact even if the terminal is not correctly tightened.

• Suitable for a broad range of cross-section and wire types
• Wires can be connected without any special preparations
• Easy to handle and safe to connect
• Excellent vibration resistance
• High reliability and maintenance free
• Very low contact resistant
• Easy mounting and dismounting from DIN rail

Note

For a suitable end plate, please see RS 878-7540

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Accessory Type End Plate
For Use With CDU, CTR
Series CEP
790 op voorraad - levertijd is 1 werkdag(en)
Prijs Each (In a Pack of 5)
0,31
(excl. BTW)
0,38
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
0,31 €
1,55 €
*prijsindicatie
Related Products
The Mini Series Empty Modular Interface Supports are ...
Description:
The Mini Series Empty Modular Interface Supports are designed to accommodate 72mm wide PCB’s. The modular construction of these PCB carriers means they can accommodate various lengths of PCB’s. Suitable for 72mm width PCB’sModular construction for easy assemblySnap fit Din ...
COMBICON MKDS PCB terminal blocks are small and ...
Description:
COMBICON MKDS PCB terminal blocks are small and compact in design. • Robust moving cage principle accepts wires up to 1.5 mm² (1.0 mm² stranded)• Reliable strain relief due to separate solder pin and terminal sleeve• Rated at 200 V/12 ...
Standard:  NF C 63-023. Cable ends comprising a tinned ...
Description:
Standard:  NF C 63-023. Cable ends comprising a tinned copper tube with a moulded isolating collar at the end.The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.These ends are available for conductors with cross-sections from ...
Standard:  NF C 63-023. Cable ends comprising a tinned ...
Description:
Standard:  NF C 63-023. Cable ends comprising a tinned copper tube with a moulded isolating collar at the end.The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.These ends are available for conductors with cross-sections from ...