0375 Bridge Bar for use with Terminal Blocks

  • RS-stocknr. 675-8941
  • Fabrikantnummer 0 375 04
  • Fabrikant Legrand
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Legrand Bridge Bar

The Legrand bridge bar is an ideal device for screws and spring terminal blocks. It can be front-mounted with automatic insertion without screws.

Features and Benefits

Consecutive or alternating connection
For 10 blocks with 6mm pitch – red
Isolated and separable

Specificaties
Kenmerk Waarde
Accessory Type Bridge Bar
For Use With Terminal Block
Series 0375
285 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
4,20
(excl. BTW)
5,08
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
4,20 €
21,00 €
*prijsindicatie
Related Products
Zinc-plated and passivated steel inserts All contacts on ...
Description:
Zinc-plated and passivated steel inserts All contacts on any one pole are commoned. Nylon body materialMounts direct to flat surface (including metal base) or to miniature DIN rail (stock no. 467-349)The tab/tab type has three 6.3 mm ( in.) tabs ...
Terminal cable clamps enabling easy termination and connection ...
Description:
Terminal cable clamps enabling easy termination and connection of cable shielding to terminal blocks. The cable clamps accept shielded cable diameters between 3 and 13.5mm and are manually mounted on a 10 x 3mm busbar attached to a busbar support ...
A range of Busbar Accessories for supporting on ...
Description:
A range of Busbar Accessories for supporting on DIN Rails and Cable attachment.290-1208 SK8 12 mm wide terminal block290-1214 SK14 17 mm wide terminal block290-1220 SK20 24 mm wide terminal block290-1236 AB-SK Shield support for busbar.
A handy terminal kit which features a panel ...
Description:
A handy terminal kit which features a panel mount base, 3 way terminal and covering shroud. The base has two moulded lugs on the underside that snap fit into mounted holes of 5.2mm diameter. A screw cable clamp is provided ...