Partition plate for 2.5mm2 to 10mm2

  • RS-stocknr. 123-7911
  • Fabrikantnummer XW5Z-S2.5PT
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

End Plates

End plates and separation plates for use with XW5G & XW5T series DIN Rail terminal blocks.

DIN Rail Terminal Blocks

Specificaties
Kenmerk Waarde
Accessory Type Label
For Use With XW5G-S10-1.1-1 Grounding Terminal Block, XW5G-S2.5-1.1-1 Grounding Terminal Block, XW5G-S4.0-1.1-1 Grounding Terminal Block, XW5G-S4.0-1.1-2 Grounding Terminal Block, XW5G-S4.0-1.2-1 Grounding Terminal Block, XW5G-S4.0-2.2-1 Grounding Terminal Block, XW5G-S6.0-1.1-1 Grounding Terminal Block, XW5T-S10-1.1-1 Feed Through Terminal Block, XW5T-S2.5-1.1-1 Feed Through Terminal Block, XW5T-S2.5-1.1-2 Feed Through Terminal Block, XW5T-S2.5-1.1-2V Feed Through Terminal Block, XW5T-S4.0-1.1-1 Feed Through Terminal Block, XW5T-S4.0-1.1-2 Feed Through Terminal Block, XW5T-S4.0-1.1-2V Feed Through Terminal Block, XW5T-S4.0-1.2-1 Feed Through Terminal Block, XW5T-S4.0-2.2-1 Feed Through Terminal Block, XW5T-S6.0-1.1-1 Feed Through Terminal Block
Series XW5Z
30 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,55
(excl. BTW)
0,67
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,55 €
5,50 €
*prijsindicatie
Related Products
COMBICON MKDS PCB terminal blocks are small and ...
Description:
COMBICON MKDS PCB terminal blocks are small and compact in design. • Robust moving cage principle accepts wires up to 1.5 mm² (1.0 mm² stranded)• Reliable strain relief due to separate solder pin and terminal sleeve• Rated at 200 V/12 ...
High quality PCB mount screw terminals available in ...
Description:
High quality PCB mount screw terminals available in vertical, 55° entry or double level mouldings. Standard, low profile and high current versions are all available on either 2 way or 3 way housings, side stackable up to 30 way. All ...
Standard:  NF C 63-023. Cable ends comprising a tinned ...
Description:
Standard:  NF C 63-023. Cable ends comprising a tinned copper tube with a moulded isolating collar at the end.The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.These ends are available for conductors with cross-sections from ...
W series stud terminals available in single or ...
Description:
W series stud terminals available in single or double studs from M6 to M16 accepting up to 300 mm² cables. Manufactured from self-extinguishing polyamide UL94V0 and supplied with nut and spring washer. • Double studs with integral partitions• Easily cross ...