Polyamide, End Cover for use with Terminal Blocks

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

Single Pole Interlocking Barrier Strip

Zinc-plated and passivated steel inserts All contacts on any one pole are commoned. Nylon body material
Mounts direct to flat surface (including metal base) or to miniature DIN rail (stock no. 467-349)
The tab/tab type has three 6.3 mm ( in.) tabs on each side. Suitable crimp connectors are available (see stock no. 534-705). The tab/screw type has three 6.3 mm tabs on one side and an M4 screw terminal on the other
An end plate must be used to complete any combination of terminals. This plate has the final 3.5 mm fixing hole
Fixing centres: 11.2 mm terminal to terminal, 11.0 mm terminal to end plate

Specificaties
Kenmerk Waarde
Accessory Type End Cover
For Use With Terminal Block
Series Polyamide
95 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1620 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,854
(excl. BTW)
1,033
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
0,854 €
4,27 €
50 - 120
0,812 €
4,06 €
125 +
0,768 €
3,84 €
*prijsindicatie
Related Products
The Phoenix Contact space saving 3.5 mm pitch ...
Description:
The Phoenix Contact space saving 3.5 mm pitch Combicon FK-MPT series of miniature connection terminals are for solid conductors which are held by the tried and tested spring-cage double connection system. • Easy push-in connection saves you time• Tools are ...
COMBICON MKDS PCB terminal blocks are small and ...
Description:
COMBICON MKDS PCB terminal blocks are small and compact in design. • Robust moving cage principle accepts wires up to 1.5 mm² (1.0 mm² stranded)• Reliable strain relief due to separate solder pin and terminal sleeve• Rated at 200 V/12 ...
High quality PCB mount screw terminals available in ...
Description:
High quality PCB mount screw terminals available in vertical, 55° entry or double level mouldings. Standard, low profile and high current versions are all available on either 2 way or 3 way housings, side stackable up to 30 way. All ...
Terminal cable clamps enabling easy termination and connection ...
Description:
Terminal cable clamps enabling easy termination and connection of cable shielding to terminal blocks. The cable clamps accept shielded cable diameters between 3 and 13.5mm and are manually mounted on a 10 x 3mm busbar attached to a busbar support ...