PT100 Temperature Transmitter, 12 → 36 V dc, 0 → +100 °C

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Head Mounting

Designed for standard terminal head mounting to meet IEC801 1987 electromagnetic compatibility and have high immunity to RFI (to EMC1992)
Transmitter easily ranged and calibrated
Upscale sensor break detection
Wide range of span adjustment
Operating Temperature Range: 0 to +100°C
Dimensions: H32mm x Dia 42mm

Note

Initial temperature range refers to the factory - set temperature range for each product. The range may be re-configured to suit the individual requirements specified by the user.

Specificaties
Kenmerk Waarde
Input Type PT100
Supply Voltage 12 → 36 V dc
Diameter 42 mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +100°C
Series RS PRO
Depth 32mm
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
37 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
57,88
(excl. BTW)
70,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
57,88 €
Related Products
Measurement converter for rail mounting, four wires, adjustable ...
Description:
Measurement converter for rail mounting, four wires, adjustable via DIP switches. Connection to a resistance probe (PT100 or PT1000) or a two or three-wire potentiometer.Selection of the measurement range via a DIP switch or PC setup software.Choice of output signal: ...
PR Electronics 2914 2-wire room temperature transmitter is ...
Description:
PR Electronics 2914 2-wire room temperature transmitter is a complete sensor and transmitter in a slim cabinet design. A precision PT100 sensor with small mass is mounted on the transmitter input, therefore achieving a fast response time. Suitable as a ...
Galvanic separation of the unit signalTo mount on ...
Description:
Galvanic separation of the unit signalTo mount on a 35 x 7.5 mm top hat rail according to EN 50 022JUMO dTRANS T02 transducers include a microprocessor for digital signal processingInput and output are galvanically separatedThe transducers can be programmed ...
Galvanic separation of the unit signalTo mount on ...
Description:
Galvanic separation of the unit signalTo mount on a 35 x 7.5 mm top hat rail according to EN 50 022JUMO dTRANS T02 transducers include a microprocessor for digital signal processingInput and output are galvanically separatedThe transducers can be programmed ...