Carlo Gavazzi Power Control, Analog Input Input, 30 A

  • RS-stocknr. 125-0691
  • Fabrikantnummer RGC1P23V30ED
  • Fabrikant Carlo Gavazzi
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MT
Productomschrijving

Carlo Gavazzi SSR Power Controller

The Carlo Gavazzi RGC1P series SSR power controller has a solid-state contactor supplied with the integrated heatsink. It required analogue input and a current rating of 30A. It is used to control the output power of single-phase loads with an analogue control input. It has selectable switching modes regulated with a knob on the front of the controller. This also allows phase angle control, full-cycle control, advanced full-cycle control, and soft starting. The output of the power controllers is protected against overvoltages by an integrated varistor across the output.

Features and Benefits

100kA short circuit current rating
1-pole analogue switching AC solid-state contactors
2 front LEDs indicate the status of load and control
Control inputs: 4-20 mA, 0V-5V, 1V-5V, 0V-10V, external potentiometer
DIN-rail or panel mounting
Integrated heatsink
Integrated varistor protection on output
Rated operation current up to 63AAC
Rated operational voltage up to 660VAC
Selectable modes of operation are Phase angle, full-cycle x1, x4 or x16, advanced full-cycle specific for short wave infrared heaters and soft starting for limiting inrush current of loads having a high-temperature coefficient

Certifications

CE certified
cULus approved

Specificaties
Kenmerk Waarde
Input Type Analog Input
40 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
91,93
(excl. BTW)
111,24
(incl. BTW)
Aantal stuks
Per stuk
1 +
91,93 €
Related Products
The drive is designed for modern automation systems. ...
Description:
The drive is designed for modern automation systems. Control can be performed easily with relay or open collector outputs. Analogue controls work with ±10V voltage. Usable motor can be permanent magnet motor with brushes,in power range of 5 to 80 ...
The SmartCella is an electronic temperature controller with ...
Description:
The SmartCella is an electronic temperature controller with LED display designed to be used to control single phase cold rooms. It is highly flexible in installation and is suited for applications requiring high load switching power.The temperature controller is designed ...
TST01 Series Thyristor stack designed for resistive and ...
Description:
TST01 Series Thyristor stack designed for resistive and inductive loads with phase angle controlled firing. The power controllers are compact with PA-firing, built in a rugged aluminium casing for easy handling and mounting. To save wiring time and costs, the ...
The RGC1P series of power controllers are supplied ...
Description:
The RGC1P series of power controllers are supplied with integrated heatsink and are used to control output power of single phase loads with an analogue control input. Switching modes are selectable using a knob on the front of the controller ...