Windows 7, Windows XP Temperature Control Software for use with Jumo Dicon Touch B703571.0

  • RS-stocknr. 823-9846
  • Fabrikantnummer Software-Paket
  • Fabrikant Jumo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DICON touch - Process- and Program Controller Software

The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.

Software for DICON touch controller
- Program Editor Software (stock-no.: 823-9843)
- Setup/Editor/Startup-Software (stock-no.: 823-9849)
- Evaluation and Visualization Software PCA3000 (stock-no.: 823-9846)

Specificaties
Kenmerk Waarde
For Use With Jumo Dicon Touch B703571.0
Operating System Windows 7, Windows XP
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
379,39
(excl. BTW)
459,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
379,39 €
Related Products
The Powersuite software workshop for PC is for ...
Description:
The Powersuite software workshop for PC is for commissioning starters and variable speed drive controllers.It is used for the preparation, programming, commissioning and maintenance phases.Able to configure Altistart range starters and all the Altivar range controllers.Microsoft Windows® environment.
The CA8334B combines the functions of a powerful ...
Description:
The CA8334B combines the functions of a powerful electrical interference analyser with power quality measurement.Robust, portable container; thanks to its large display the user can clearly see all the voltage and current waveforms, as well as vectorial diagrams for each ...
True rms measurement (AC + DC)Automatic and manual ...
Description:
True rms measurement (AC + DC)Automatic and manual measuring range selectionDisplay with bar chart and backlightMeasures capacity, frequency, temperature and attenuationCurrent loop measurement 4 → 20 mADuty cycle functionMIN / MAX / HOLD functionsAcoustic continuity testAuto power off functionRS232 interface ...
SIMATIC STEP 7 Basic V15.1; Floating License; Engineering ...
Description:
SIMATIC STEP 7 Basic V15.1; Floating License; Engineering Software in TIA Portal; SW and documentation on DVD; license key on USB flash drive; Class A; 6 languages: de,en,fr,es,it,zh; Executable in Windows 7 (64-bit), Windows 10 (64-bit), Windows Server 2012R2 (64-bit), ...