Jumo Plug In Optional Module for use with 703571 JUMO DICON Touch

  • RS-stocknr. 823-9871
  • Fabrikantnummer 703571/0001
  • Fabrikant Jumo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DICON touch - Process- and Program Controller Accessories

The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.

Accessories for DICON touch controller
- Module cards input/output
- Module cards communication
- USB-Stick 2.0 2GB

Specificaties
Kenmerk Waarde
Module Form Plug In Optional Module
Module Type Ethernet Interface
For Use With 703571 JUMO DICON Touch
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
101,00
(excl. BTW)
122,21
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
101,00 €
5 +
97,98 €
Related Products
With our Bulletin 2080 Micro800™ Programmable Logic Controllers ...
Description:
With our Bulletin 2080 Micro800™ Programmable Logic Controllers Plug-in Modules and Accessories, you can adapt your base unit controller to fit your application needs. Extend the functionality of embedded I/O without increasing the footprint of your controller. Increase the system ...
Process and program controller with 2 channelsBrilliant 5" ...
Description:
Process and program controller with 2 channelsBrilliant 5" colour display with 27 coloursFreely configurable screen masks50 programs with 1000 sections, dynamically managed16 limit comparatorsSampling time from 50 msSelf-optimisation with vibration and step response methodInput and output modules and interface ...
High-contrast, multicolour displayConfigurable process display text, max. 24 ...
Description:
High-contrast, multicolour displayConfigurable process display text, max. 24 character tickerUniversal input for analogue signalsStandard assembly with 1 analogue and 2 binary inputs, as well as 2 relay outputs and 2 logic outputsCan be expanded with optional modulesSetup programme for quick ...
These boards are compatible with West Plus series ...
Description:
These boards are compatible with West Plus series controls and indicators. The Plus series instruments model numbers start with a P. These boards can be used to change or add functionality. They are easily installed with the Plus series plug ...