Windows Temperature Control Software for use with Jumo Dicon Touch B703571.0

  • RS-stocknr. 823-9849
  • Fabrikantnummer Setup/ProgEdit/Startup-Programm DICON touch
  • Fabrikant Jumo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DICON touch - Process- and Program Controller Software

The DICON touch is a two-channel universal process and program controller that displays information using a vibrant TFT colour graphics display. The device is operated intuitively by touch.
Both control channels use the tried-and-tested JUMO control algorithm with two possible optimization options. These enable a simple and highly-accurate startup. It enables multiple zone control, cascade control, or other complex control tasks.
4 analog universal inputs and up to 8 external inputs can record a variety of physical measured values with high precision. The actuators can be controlled directly in the device with either an analog or digital setup. These can be expanded further through external digital outputs. Interfaces such as Modbus, PROFIBUS, or Ethernet with web server can be used for the communication with higher-order systems.
An individual process screen can be created by using the configuration software. Using the recording extra-code important analog and digital process values can be saved so that they are tamper-proof, so that they can be graphically visualized, and so that they can be exported via interface or USB-stick in a tamper-proof fashion to the PC.
The configuration software ensures that the process controller can be easily programmed, that math or logical coherences can be described, and that customer-specific linearization can be created. In addition, tools for simulating external signals or control paths are included. These tools can also record for the duration of the startup.
A comprehensive alarm and limit-value concept as well as a flexible digital signal administration complete the "all-in-one" device.

Software for DICON touch controller
- Program Editor Software (stock-no.: 823-9843)
- Setup/Editor/Startup-Software (stock-no.: 823-9849)
- Evaluation and Visualization Software PCA3000 (stock-no.: 823-9846)

Specificaties
Kenmerk Waarde
Accessory Type Software
For Use With Jumo Dicon Touch B703571.0
Operating System Windows 7, Windows XP
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
236,43
(excl. BTW)
286,08
(incl. BTW)
Aantal stuks
Per stuk
1 +
236,43 €
Related Products
Complete range of mini data loggers for all ...
Description:
Complete range of mini data loggers for all temperature, humidity, and industrial parameter monitoring applications.Logs saved for more than 2 years (memory capacity: 21,600 measurements or 43,300 for LOG 1550 K1 model).Possibility of recovering data without interrupting recording.Programming of recording ...
The KS 90-1 process controller is suitable for ...
Description:
The KS 90-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.The process value signal is connected via a universal input. A supplementary analog input ...
Premium range of temperature controllers which support a ...
Description:
Premium range of temperature controllers which support a wide variety of applications. The controllers cover a comprehensive array of sensor inputs including Universal, Thermocouple, PT and Analogue current/voltage. Within the E5EC range, there is a temperature controller to suit your ...
Universal, freely configurable process controllerAvailable sizes: 96 x ...
Description:
Universal, freely configurable process controllerAvailable sizes: 96 x 96 mm and 96 x 48 mm (portrait and landscape)Two four-digit seven-segment displaysFive or eight LEDs to indicate switching positions and operating modes, eight-digit matrix displaySix buttons for operation and configurationBasic version ...