Recom Switching Regulator, Through Hole, 24V dc Output Voltage, 36 → 72V dc Input Voltage, 300mA Output Current,
- RS-stocknr.:
- 672-7114
- Fabrikantnummer:
- R-78HB24-0.3L
- Fabrikant:
- Recom
25 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 18,38
(excl. BTW)
€ 22,24
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 18,38 |
5 - 9 | € 17,83 |
10 - 24 | € 17,28 |
25 - 49 | € 16,73 |
50 + | € 16,17 |
- RS-stocknr.:
- 672-7114
- Fabrikantnummer:
- R-78HB24-0.3L
- Fabrikant:
- Recom
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- TW
Productomschrijving
R-78HBxx-0.5L Series
Non-isolated
Medical safety approval EN-60601-1-2
High efficiency switching regulator
High voltage input range, up to 72V
Thermal shutdown and continuous short circuit protection
Low ripple and noise
Low profile
Pin-out compatible with LM78XX Linear regulators
L version with 90° pins
Medical safety approval EN-60601-1-2
High efficiency switching regulator
High voltage input range, up to 72V
Thermal shutdown and continuous short circuit protection
Low ripple and noise
Low profile
Pin-out compatible with LM78XX Linear regulators
L version with 90° pins
Note
De-rate above 71°C operating temperature.
MTBF to MIL_HDBK 217F.
MTBF to MIL_HDBK 217F.
Standards
EN-55022, EN-55024, EN-60601-1-2, EN-60950-1
RECOM Switching Regulator, 36 to 72V DC Input Voltage, 24V DC Output Voltage - R-78HB Series - R-78HB24-0.3L
Use this switching regulator from RECOM to convert incoming power into a voltage suitable for your attached device. It's capable of converting a high input voltage up to 72V DC into a steady 24V DC output, making it a reliable choice. It's easy to install this switching regulator thanks to its through-hole method and as it weighs just 4g, it won't put undue stress on your setup
Features & Benefits
SIP package type reduces surface area and dimensions of 11.5 (L) x 8.5 (W) x 17.5mm (D) make it a practical choice for installation in small spaces
Operating efficiency of 92% for minimal energy wastage
Line regulation of ±1% ensures reliable output voltage
Load regulation of ±0.6% gives dependable power despite load changes
Broad operating temperature range from -40°C to +85°C for use in harsh industrial environments
Operating efficiency of 92% for minimal energy wastage
Line regulation of ±1% ensures reliable output voltage
Load regulation of ±0.6% gives dependable power despite load changes
Broad operating temperature range from -40°C to +85°C for use in harsh industrial environments
Applications
Industrial power supplies
Factory automation
Medical equipment
Factory automation
Medical equipment
Why are switching regulators needed?
Switching regulators are used to change input direct current voltage to the current voltage needed to run your component without damage.
Specificaties
Kenmerk | Waarde |
---|---|
Output Voltage | 24V dc |
Output Current | 300mA |
Input Voltage | 36 → 72V dc |
Mounting Type | Through Hole |
Number of Outputs | 1 |
Package | SIP |
Efficiency | 92% |
Ripple And Noise | 60mV Pk-Pk |
Minimum Temperature | -40°C |
Maximum Temperature | +85°C |
Series | R-78HB |
Line Regulation | ±1% |
Depth | 17.5mm |
Switching Frequency Range | 120 → 800kHz |
Load Regulation | ±0.6% |
MTBF | 7395000h |
Length | 11.5mm |
Protection Features | Short Circuit Protection |
Weight | 4g |
Width | 8.5mm |