Murata Power Solutions Non-Isolated DC-DC Converter, 12V dc Input, 5V dc Output, 1.5A

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series

The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits

Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance

Approvals

UL/EN/IEC 60950-1, 2nd Edition

Murata Power Solutions Non-Isolated DC-DC Converter

The Murata Power Solutions Non-Isolated DC-DC converter is used for the embedded application. It has three nominal output voltage terminals and up to 1.5A is the maximum output. The ultra-wide input range of upto 12VDC. Based on fixed frequency the high efficiency means very low heat and low electrical noise requiring no external component. The fixed single output converters provide both tight regulation and high efficiency directly at power usage site and are direct plug-in instead of linear regulators hence no extra outside component is required

Features and Benefits

• High efficiency with no external components
• No heat sink direct replacement for 3-terminal
• Operating temperature is from -40°Cto 85°C
• Outstanding thermal derating performance
• Short circuit protection
• Vertical SIP or horizontal mount, small footprint, in an encapsulated package

Applications

• Control boxes
• Control boxes
• ITE commercials
• ITE commercials

Certifications

• UL certified

Specificaties
Kenmerk Waarde
Input Voltage 12V dc
Output Voltage 5V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 7.5W
Mounting Type Through Hole
Package TO-220
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 90.5%
MTBF 78700000h
Load Regulation ±0.4%
Line Regulation ±0.25%
Ripple And Noise 40mV Pk-Pk
Allowed Circuit Configurations Parallel
Length 10.4mm
Weight 2g
Power Signal Conversion Type DC-DC
Protection Features Short Circuit Protection
Maximum Input Current 690mA
Depth 16.5mm
Width 8.6mm
Switching Frequency Range 500kHz
Rated Output Power 7.5W
Series OKI-78SR
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23/03/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Box of 100)
4,137
(excl. BTW)
5,006
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
100 - 100
4,137 €
413,70 €
200 - 400
4,117 €
411,70 €
500 - 900
3,896 €
389,60 €
1000 +
3,393 €
339,30 €
*prijsindicatie
Related Products
High efficiencyUnregulated output1kV input/output isolationNo external components requiredUL ...
Description:
High efficiencyUnregulated output1kV input/output isolationNo external components requiredUL 94V-0 package materialSIP4 plastic package.
The Traco Power TEM 3N series is a ...
Description:
The Traco Power TEM 3N series is a range of isolated DC/DC converters in a DIP-24 package.The offer tight output regulation and very low output noise. The TEM 3N series provides a cost effective solution for many industrial or consumer ...
The Murata MGJ2 series of DC-DC converters is ...
Description:
The Murata MGJ2 series of DC-DC converters is ideal for powering high side and low side gate drive circuits in bridge circuits for IGBTs and Mosfets. These isolated DC-DC converters offer a choice of asymmetric output voltages allowing optimal drive ...
Non-isolatedPOLA (Point-of-Load Alliance product)Wide input voltage rangeUp to ...
Description:
Non-isolatedPOLA (Point-of-Load Alliance product)Wide input voltage rangeUp to 10A output currentAdjustable output voltage via external resistorsAuto-track™ sequencingMargin up/down controlsPre-bias start-up capabilityOutput ON/OFF inhibitOutput voltage senseUnder-voltage lockout and short current ...