Murata Power Solutions Non-Isolated DC-DC Converter, 24V dc Input, 12V dc Output, 1A

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

The OKI-78SR-E series are non-isolated switching regulator (SR) DC-DC power converters for embedded applications. The fixed single output converters offer both tight regulation and high efficiency directly at the power usage site and are a direct plug-in replacement for TO-220 package 78xx series linear regulators. Typically, no extra outside components are required.

Vertical SIP or horizontal mount, small footprint,in an Encapsulated packageNo heat sink direct replacement for 3-terminal78xx-series linear regulatorsHigh efficiency with no external componentsShort circuit protectionOutstanding thermal derating performance

Specificaties
Kenmerk Waarde
Input Voltage 24V dc
Output Voltage 12V dc
Number of Outputs 1
Output Current 1A
Power Rating 12W
Mounting Type Through Hole
Package TO-220
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 95.3%
MTBF 78700000h
Load Regulation ±0.25%
Line Regulation ±0.25%
Ripple And Noise 75mV Pk-Pk
Switching Frequency Range 500kHz
Rated Output Power 12W
Power Signal Conversion Type DC-DC
Protection Features Short Circuit Protection
Depth 17.6mm
Width 10mm
Maximum Input Current 530mA
Length 11.9mm
Allowed Circuit Configurations Parallel
Weight 4.5g
Series OKI-78SR
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 01/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Box of 126
6,073
(excl. BTW)
7,348
(incl. BTW)
Box(es)
Per doos
Per stuk*
126 - 251
6,073 €
0,048 €
252 - 503
5,954 €
0,047 €
504 - 1007
5,717 €
0,045 €
1008 +
4,979 €
0,04 €
*prijsindicatie
Related Products
The Murata PS MEE1 series is high performance, ...
Description:
The Murata PS MEE1 series is high performance, efficient and offers improved regulation performance for applications where a wide output voltage variation cannot be tolerated. They are ideally suited for providing local supplies on control system boards with the added ...
The Murata MGJ2 series of DC-DC converters is ...
Description:
The Murata MGJ2 series of DC-DC converters is ideal for powering high side and low side gate drive circuits in bridge circuits for IGBTs and Mosfets. These isolated DC-DC converters offer a choice of asymmetric output voltages allowing optimal drive ...
The Murata Power MEF1 series of DC-DC converters ...
Description:
The Murata Power MEF1 series of DC-DC converters is packaged in a fully encapsulated single-in-line through-hole format, occupying less than 1.17cm squared footprint. The MEF1 converters are available with either 1kVDC or 3kVDC input to output isolation, the latter model ...
The Murata Power MEJ1 is a series of ...
Description:
The Murata Power MEJ1 is a series of isolated 1 Watt DC-DC converters, encapsulated in a 7 pin SIP package. The DC-DC converter complies with the 3rd edition of medical safety standard and provides the following MOOP (means of operator ...