Dehn 255 V 40kA DGP Type 2 Arrester, DIN Rail Mounting

  • RS-stocknr. 847-0959
  • Fabrikantnummer DGP C S
  • Fabrikant Dehn
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DEHNguard Modular Surge Arresters Type 2

DEHNguard Modular Type 2 surge arrestors, supplied as a prewired base with plug in modules

Energy coordinated with other Dehn Redline products in accordance with BS7671 amendment 1
High discharge capacity using heavy duty metal oxide varistors and spark gaps
Status indication using Thermo Dynamic Control for monitoring of the SPD
Tool less replacement of the plugs for repair and test functions

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Suppressor Type Type 2 Arrester
Maximum Voltage Rating 255 V
Mounting Type DIN Rail
Maximum Surge Current 40kA
Series DGP
Length 18mm
Depth 66mm
Height 90mm
Dimensions 18 x 66 x 90mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
59,33
(excl. BTW)
71,79
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
59,33 €
5 - 9
56,97 €
10 - 24
54,59 €
25 - 49
52,23 €
50 +
49,86 €
Related Products
I-Autoc KSV Series industrial solid state relays with ...
Description:
I-Autoc KSV Series industrial solid state relays with an integrated heatsink, designed for mounting on 35 mm DIN Rail or screwed onto a panel. The KSV SSR's offer four control voltage variations, in both AC or DC. Zero crossing switching ...
All units suitable for use within ambient temperature ...
Description:
All units suitable for use within ambient temperature range from : -20 to +60°C. Module dimensions: H105 x W22.5 x D129.5mm. Analogue converters for Pt100 probesProvides triple galvanic insulation between 2 (1.5 kV) input, output and supply signalsConnection using 2 ...
Introducing Eaton's range of PXF-A RCD, a professional ...
Description:
Introducing Eaton's range of PXF-A RCD, a professional and high-quality range of residual current devices. Providing complete protection, these RCD's have been created and designed to protect users from a fatal electric shock through the use of the automatic switch-off ...
The RCD block DDA200 series is suitable for ...
Description:
The RCD block DDA200 series is suitable for assembly with MCBs S200 series. Type B is also sensitive to continuous current pulsating earth fault currents. Applications: tertiary and industrial.