Dehn DR Series 440 V ac Maximum Voltage Rating 8kA Maximum Surge Current Surge Arrester, DIN Rail Mounting

  • RS-stocknr. 768-1798
  • Fabrikantnummer DR M 4P 255
  • Fabrikant Dehn
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DEHNrail Modular Surge Arresters Type 3

Type 3 surge devices
Compact DIN rail design comprising of base and plug in protection module
High discharge current performance using varistor and spark gap circuit
Energy coordination with other Dehn Redline products in accordance with BS7671 amendment 1
Status indication using Thermo Dynamic Control for monitoring of the SPD
Tool less replacement of the plugs for repair and test functions

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Suppressor Type Surge Arrester
Maximum Voltage Rating 440 V ac
Mounting Type DIN Rail
Maximum Surge Current 8kA
Series DR
Length 90mm
Depth 36mm
Height 66mm
Dimensions 90 x 36 x 66mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
170,72
(excl. BTW)
206,57
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
170,72 €
10 - 19
153,66 €
20 - 24
138,29 €
25 - 49
124,46 €
50 +
112,02 €
Related Products
STP T12 25 is the series of combined ...
Description:
STP T12 25 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, ...
STP T23 20 is the series of combined ...
Description:
STP T23 20 is the series of combined Type 2+3/Class II+III devices for discharging voltage surges while providing a very fine voltage protection level. Suitable as the final stage of protection in panels with Type 2 protection devices installed upstream ...
STP T12 12.5 is the series of combined ...
Description:
STP T12 12.5 is the series of combined Type 1+2/Class I+II devices for discharging lightning currents and protecting against voltage surges. Suitable as the first step of protection in incoming power supply panels and areas with exposure to the atmosphere, ...
Protection for modems, fax or telephone equipment against ...
Description:
Protection for modems, fax or telephone equipment against damage caused by spikes and surges on both 230Vac mains and the telephone line. Automatic protection against mains over-voltageFast reaction - disconnects mains in just 10ms, and telephone line in 10nsReset if ...