Dehn 500 V dc 40kA DG Type 2 Arrester, DIN Rail Mounting

  • RS-stocknr. 768-1788
  • Fabrikantnummer DG M YPV SCI 1000
  • Fabrikant Dehn
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DEHNguard Modular Surge Arresters Type 2

DEHNguard Modular Type 2 surge arrestors, supplied as a prewired base with plug in modules

Energy coordinated with other Dehn Redline products in accordance with BS7671 amendment 1
High discharge capacity using heavy duty metal oxide varistors and spark gaps
Status indication using Thermo Dynamic Control for monitoring of the SPD
Tool less replacement of the plugs for repair and test functions

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Suppressor Type Type 2 Arrester
Maximum Voltage Rating 500 V dc
Mounting Type DIN Rail
Maximum Surge Current 40kA
Series DG
Length 54mm
Depth 66mm
Height 90mm
Dimensions 54 x 66 x 90mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
203,64
(excl. BTW)
246,40
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
203,64 €
10 - 19
186,66 €
20 - 24
168,00 €
25 - 49
151,39 €
50 +
148,54 €
Related Products
The Wago rail-mounted terminal block with miniature switching ...
Description:
The Wago rail-mounted terminal block with miniature switching relay has a single changeover contact. It is actuated with a 24VDC coil and 10mA switching current.Inclusions:Relay socketsJumper bars Marker strips. Operating temperature ranges between -25°C and 60°CTerminal type is plug-inContact material ...
The TE Connectivity RM8 series DIN rail mount ...
Description:
The TE Connectivity RM8 series DIN rail mount non-latching relay has contact configuration of DPDT. It is actuated with 24VDC coil voltage and 25A switching current. This general-purpose power relay has a mechanical indicator and push-to-test button. Coil resistance is ...
Delta connected flexible wire ended universal DIN rail ...
Description:
Delta connected flexible wire ended universal DIN rail mounting RC contact arc suppressors designed to be connected across switching contacts of Control/Switchgear ContactorsIdeal for applications where inductive loads are switched and contact arc reduction is required to prolong contact life. ...
Frequency error range detection 35-75 HzOperating voltage 90V ...
Description:
Frequency error range detection 35-75 HzOperating voltage 90V to 300VLow voltage protection (LVD) Range 50V to 300VHigh voltage protection (HVD) Range 50V to 300V TimeSave™ function (Intelligent time delay)AVS™ function (Automatic Voltage Switcher) Programmable startup delay (0-1000hr range).