Surface Mount (SMT) Board TSSOP Epoxy Glass Double-Sided 34.5 x 27 x 1.5mm FR4

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

TSSOP Multi-Adaptor Boards, RE933

Material thickness: 1.50mm
Double-sided, 35μm copper
Through-holes Ø 1.00mm
Soldered and component sides coated with chemical gold and solder mask
Prescored break lines allow separation of individual modules from the board

Specificaties
Kenmerk Waarde
SMD Component Type TSSOP
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 34.5 x 27 x 1.5mm
Copper Thickness 35µm
Hole Diameter 1mm
Hole Pitch 0.5 x 0.5mm
FR Material Grade FR4
Length 34.5mm
Thickness 1.5mm
Width 27mm
17 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
5,80
(excl. BTW)
7,02
(incl. BTW)
Aantal stuks
Per stuk
1 +
5,80 €
Related Products
FR4 board, hot air levelled, solder stop mask ...
Description:
FR4 board, hot air levelled, solder stop mask coatedConnector type DIN 41612Copper thickness 35μmBoard size 100 x 160 x 1.6mm.
Adaption board for 1 x MSOP-101.5 mm FR4 ...
Description:
Adaption board for 1 x MSOP-101.5 mm FR4 epoxy glass-reinforced laminate (through hole plated)Soldering and component side surface made of chem. AU and solder mask.
Pre-scored break-lines allow individual module separation2 component sides ...
Description:
Pre-scored break-lines allow individual module separation2 component sides with gold and solder stop mask coatingPlated through holesEpoxy fibre-glass FR4Board size 120 x 175 x 1.5mmHole dia 1.0mm.
1.5 mm FR4 epoxy, 35 μm CU on ...
Description:
1.5 mm FR4 epoxy, 35 μm CU on both sidesPlated drill holes, Ø 1 mmSoldering and component side surface made of chem. nickel/gold (Ni/Au) and solder maskPre-scored breaking points for detaching individual modules from the boardSize 72.6 x 76.2 mmAdaption ...