Molex QF 50 Series, 14 Way Strain Relief Connector for use with 5320 Series, 90170 Series, 90635 Series

  • RS-stocknr. 670-5988
  • Fabrikantnummer 90170-0014
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IE
Productomschrijving

Strain Relief

For use with Molex 5320, 90635 Series

2.54mm Molex QF-50

Specificaties
Kenmerk Waarde
Accessory Type Strain Relief Connector
For Use With 5320 Series, 90170 Series, 90635 Series
Cable Type Ribbon
Number of Ways 14
Series QF 50
Series Number 90170
1745 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
0,136
(excl. BTW)
0,165
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
0,136 €
0,68 €
50 - 120
0,122 €
0,61 €
125 - 245
0,112 €
0,56 €
250 - 495
0,10 €
0,50 €
500 +
0,09 €
0,45 €
*prijsindicatie
Verpakkingsopties
Related Products
These MR Strain Relief Housings require one No. ...
Description:
These MR Strain Relief Housings require one No. 6 Panhead Type B self-tapping screw 9.5 mm (0.375 inch) long similar to stock number 482-8076 . Flammability Rating is UL 94V-0 for these MR Strain Relief Housings.Stock numbers 820-8340, 820-8362 and ...
TE’s Novo series IDC ribbon cable connectors are ...
Description:
TE’s Novo series IDC ribbon cable connectors are designed to work hand in hand with compatible flat ribbon cables to create a cable assembly. With military and centre polarization, the Novo series is to be used with wire to board ...
AMP-Latch strain reliefs made from glass filled polyester.Part ...
Description:
AMP-Latch strain reliefs made from glass filled polyester.Part numbers X-1437020-X & X-1437021-X are strain reliefs 609 series female socket connectorsPart numbers X-499252-X are strain reliefs for AMP-Latch Novo and Ultra ATA complaint bus connectorsPart numbers X-111547-X are strain reliefs for ...
Universal MATE-N-LOK plug or cap housing strain reliefs ...
Description:
Universal MATE-N-LOK plug or cap housing strain reliefs and cap housing adaptors. The cap housing adaptors secure the cap housing strain reliefs to the housings to prevent the strain relief halves from “drawing in” when the screws are being torqued ...