TE Connectivity 24 Way for use with Metrimate Square Grid Plugs & Receptacles

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity Strain Relief Kits for Metrimate Square Grid Plug and Receptacle Connectors

Strain relief kits for use with Metrimate square grid plug and receptacle connectors. These Metrimate strain relief kits are made from red 94V-0 rated thermoplastic and are supplied with cable gates in order to accommodate various cable diameters up to the maximum specified.
Stock number 717-4647 is a 6 way strain relief kit that accepts a max cable diameter of 9.5mm
Stock number 710-0081 is a 9 way strain relief kit that accepts a max cable diameter of 11.7mm
Stock number 302-0675 is a 12 way strain relief kit that accepts a max cable diameter of 13.45mm
Stock number 302-0681 is an 18 way strain relief kit that accepts a max cable diameter of 16.5mm
Stock number 302-0704 is a 24 way strain relief kit that accepts a max cable diameter of 19.05mm
Stock number 302-0710 is a 36 way strain relief kit that accepts a max cable diameter of 23.3mm

5mm Pitch connectors
For panel or free mounting
Higher pinout than the Mate-N-Lok range

Specificaties
Kenmerk Waarde
For Use With Metrimate Square Grid Plugs & Receptacles
Number of Ways 24
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
6,67
(excl. BTW)
8,07
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
6,67 €
20 - 74
6,39 €
75 - 299
5,84 €
300 - 599
4,73 €
600 +
4,45 €
Related Products
AMP-Latch strain reliefs made from glass filled polyester.Part ...
Description:
AMP-Latch strain reliefs made from glass filled polyester.Part numbers X-1437020-X & X-1437021-X are strain reliefs 609 series female socket connectorsPart numbers X-499252-X are strain reliefs for AMP-Latch Novo and Ultra ATA complaint bus connectorsPart numbers X-111547-X are strain reliefs for ...
Strain relief boots for RF coaxial cable. These ...
Description:
Strain relief boots for RF coaxial cable. These strain relief boots are made from PVC and are available in a variety of colours for use with different RF coaxial groups, please see table for details.
These MR Strain Relief Housings require one No. ...
Description:
These MR Strain Relief Housings require one No. 6 Panhead Type B self-tapping screw 9.5 mm (0.375 inch) long similar to stock number 482-8076 . Flammability Rating is UL 94V-0 for these MR Strain Relief Housings.Stock numbers 820-8340, 820-8362 and ...
TE’s Novo series IDC ribbon cable connectors are ...
Description:
TE’s Novo series IDC ribbon cable connectors are designed to work hand in hand with compatible flat ribbon cables to create a cable assembly. With military and centre polarization, the Novo series is to be used with wire to board ...