RS PRO Hybrid Stepper Motor 0.9°, 0.44Nm, 2.8 V, 1.68 A, 4 Wires

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

High Torque Hybrid Stepper Motor

High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.

Features & Benefits

High Torque Stepper Motors
Hybrid technologies
Permanent magnet

Product Application Information

Computer controlled stepper motors are a type of motion-control positioning system. They are typically digitally controlled as part of an open loop system for use in holding or positioning applications.

In the field of lasers and optics they are frequently used in precision positioning equipment such as linear actuators, linear stages, rotation stages, goniometers, and mirror mounts. Other uses are in packaging machinery, and positioning of valve pilot stages for fluid control systems.

Commercially, stepper motors are used in floppy disk drives, flatbed scanners, computer printers, plotters, slot machines, image scanners, compact disc drives, intelligent lighting, camera lenses, CNC machines and, more recently, in 3D printers.

Note

The winding on this article is a 4 Wire Bipolar.

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:

Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters

Specificaties
Kenmerk Waarde
Step Angle 0.9°
Holding Torque 0.44Nm
Number Of Wires 4
Voltage Rating 2.8 V
Frame Size 42.3 x 42.3mm
Stepper Motor Type Hybrid
Shaft Diameter 5mm
Current Rating 1.68 A
Shaft Length 24mm
Depth 47mm
Resistance Per Phase 1.65Ω
Standards Met RoHS Compliant
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
200 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
56,11
(excl. BTW)
67,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
56,11 €
5 - 9
54,42 €
10 +
52,19 €
Related Products
Sanyo Denki range of 2H56 series Stepper Motors ...
Description:
Sanyo Denki range of 2H56 series Stepper Motors providing the user with a comprehensive range of options to ensure that your application is covered. These 56 mm Sq. stepper motors are lead wire type and are available with a step ...
The Festo EMMS-ST series is a 2-phase hybrid ...
Description:
The Festo EMMS-ST series is a 2-phase hybrid technology stepper motor. It has an electrical rating of 48VDC and 5A with a 1.8° step angle and a torque of 0.8Nm. The motor has an output speed of 2720 RPM and ...
2-phase hybrid technology Optionally integrated encoder (closed loop) ...
Description:
2-phase hybrid technology Optionally integrated encoder (closed loop) Sinusoidal current impressing Optionally with holding brake.
The STM17S is an integrated Drive and Motor, ...
Description:
The STM17S is an integrated Drive and Motor, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions. Drive + Motor + Control in one unit4 quadrant ...