RS PRO Hybrid Stepper Motor 1.8°, 0.88Nm, 5.4 V dc, 1.4 A, 8 Wires

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

Stepper Motors With/Without Rear Shaft Extensions

RS Pro stepper motors with 6 or 8 lead configuration.

Features and Benefits

High quality High reliability
Innovative
Advanced technology
Low noise and low vibration
Proper torque
Smooth run

Product Application Information

Computer controlled stepper motors are a type of motion-control positioning system. They are typically digitally controlled as part of an open loop system for use in holding or positioning applications.

In the field of lasers and optics they are frequently used in precision positioning equipment such as linear actuators, linear stages, rotation stages, goniometers, and mirror mounts. Other uses are in packaging machinery, and positioning of valve pilot stages for fluid control systems.

Commercially, stepper motors are used in floppy disk drives, flatbed scanners, computer printers, plotters, slot machines, image scanners, compact disc drives, intelligent lighting, camera lenses, CNC machines and, more recently, in 3D printers.

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:

Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters

Specificaties
Kenmerk Waarde
Step Angle 1.8°
Holding Torque 0.88Nm
Number Of Wires 8
Voltage Rating 5.4 V dc
Frame Size 56.4 x 56.4mm
Stepper Motor Type Hybrid
Shaft Diameter 6.35mm
Current Rating 1.4 A
Shaft Length 116.6mm
Depth 76mm
Resistance Per Phase 3.6Ω
Standards Met RoHS Compliant
24 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
61,72
(excl. BTW)
74,68
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
61,72 €
3 - 4
59,87 €
5 +
57,40 €
Related Products
Robust assembly, high-speed range, and exceptional performance in ...
Description:
Robust assembly, high-speed range, and exceptional performance in even the harshest environments make the ADM1220S series stepper motor the perfect solution for the demanding positioning applications.Stepper motors can be used for more than just rotation. When combined with lead screws, ...
Sany Denki range of 103H7 Stepper Motors providing ...
Description:
Sany Denki range of 103H7 Stepper Motors providing the user with a comprehensive range of options to ensure your application is covered. Offered in both Unipolar & Bipolar winding optionsSingle round and double round shaft designs with adequate length providing ...
Hybrid stepper motors from RS PRO are high ...
Description:
Hybrid stepper motors from RS PRO are high performance DC motors, perfect for applications requiring precise movement or rotation in steps. They combine characteristics from both VR (variable reluctance) stepper motors and PM (permanent magnet) stepper motors, offering a versatile ...
The STM23IP is an integrated Drive and Motor, ...
Description:
The STM23IP is an integrated Drive and Motor, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions. Drive + Motor + Control in one unit4 quadrant ...