EXACT HSS Step Drill Bit 7mm x 32.5mm
- RS-stocknr.:
- 508-8948
- Fabrikantnummer:
- 05310
- Fabrikant:
- EXACT
8 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 71,77
(excl. BTW)
€ 86,84
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 71,77 |
- RS-stocknr.:
- 508-8948
- Fabrikantnummer:
- 05310
- Fabrikant:
- EXACT
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Step Drill for Cable Glands
Combined HSS step drill for making core and through holes for cable glands
With spiral groove and deburring zone
No centre-punching necessary, drill bits do not run
Better flowing and paring cut through spiral groove
Constant cutting angle during the whole process
Suitable for construction steel, CrNi steel and non-ferrous metals up to 6 mm thick
Diameter specification is lasered on every level
Three-faced driving shaft, prevents slipping in the drill chuck
With spiral groove and deburring zone
No centre-punching necessary, drill bits do not run
Better flowing and paring cut through spiral groove
Constant cutting angle during the whole process
Suitable for construction steel, CrNi steel and non-ferrous metals up to 6 mm thick
Diameter specification is lasered on every level
Three-faced driving shaft, prevents slipping in the drill chuck
Standards
DIN 335C
Specificaties
Kenmerk | Waarde |
|---|---|
| Drill Bit Type | Step Drill Bit |
| Number of Steps | 11 |
| Material | HSS |
| Minimum Head Size | 7mm |
| Maximum Head Size | 32.5mm |