Mild Steel Rectangular Bar, 1m x 40mm x 6mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Bright Mild Steel Rod & Rectangular Bar

Bright mild steel for general purpose use, suitable for case hardening and welding.

Supplied in 1m lengths
Easily machined and welded, and suitable for heat treatment
Typical tensile strength 460N/mm2
To BS970:1983:080A15

Standards

BS970: 1983: O80A15

Specificaties
Kenmerk Waarde
Material Mild Steel
Form Rectangular Bar
Length 1m
Width 40mm
Thickness 6mm
24 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Lot of 3
35,01
(excl. BTW)
42,36
(incl. BTW)
Lot(s)
Per lot
Per stuk*
1 - 2
35,01 €
11,67 €
3 - 9
32,56 €
10,853 €
10 - 29
30,81 €
10,27 €
30 +
28,01 €
9,337 €
*prijsindicatie
Related Products
General purpose non-magnetic stainless steel possessing good weldability, ...
Description:
General purpose non-magnetic stainless steel possessing good weldability, formability and general corrosion resistance. Bar-rolled edgeRod - BS970 pt 3 BSEN 10088-3Angle - BS970 pt 1 BSEN10051Square - BS970 pt 3 BSEN 10088-3Sheet - BS1449 pt 2 BSEN 10088-2 (2B surface ...
Austenitic stainless steels which are highly resistant to ...
Description:
Austenitic stainless steels which are highly resistant to corrosion due to their Molybdenum content. They are non-magnetic and suitable for applications such as photographic, food, chemical and marine equipment. 316TI Stainless Key SteelGrade DIN 1.4571.
Square Bar to BS46: Part 1 1958, BS4235: ...
Description:
Square Bar to BS46: Part 1 1958, BS4235: Part 1 1972Zinc and chromate passivated finishSupplied in 13in. (330mm) lengthsAvailable in individual sizes or assorted packs.
Tool steel to BS1407Controllers ground and polishedMetric or ...
Description:
Tool steel to BS1407Controllers ground and polishedMetric or Imperial sizesApplications include punches, dowels, mandrels, spindles, shafts, pinions, gauges etc.