RS PRO Non-Fused Terminal Block, 10 Way/Pole, Screw Terminals, 10 mm² Panel Mount, PC, 450 V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

End Connector Terminal Blocks

Quality single pole polycarbonate termination/terminal blocks. Available in singles and in 10-way strips. Designed for termination or the joining of cable ends.

Housing material: transparent blue polycarbonate UL 94 - V0
Funnel cable entry
Screw clamp
Voltage rating: 450V
Rated voltage: 450 V
Peak operational temperature: 85°C
Clamp material: brass
Screw material: galvanized steel
High mechanical resistance with good electrical characteristics

Standards

EN 60998-1: 2004
EN 60998-2-1: 2004

Specificaties
Kenmerk Waarde
Number of Ways 10
Fused No
Mounting Type Panel Mount
Termination Method Screw
Wire Size 10 mm²
Voltage Rating 450 V
Material PC
Maximum Operating Temperature +85°C
Enclosed Yes
Contact Material Brass
305 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
2,528
(excl. BTW)
3,059
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
2,528 €
12,64 €
*prijsindicatie
Related Products
A range of 10 mm Pitch Feed-Through Panel ...
Description:
A range of 10 mm Pitch Feed-Through Panel Mount Terminal Blocks from Phoenix Contact. The external side of the 10 mm Pitch Feed-Through Panel Mount Terminal Block has a Push-Lock connection and the internal side an angled Quick-fit Push-in connection.The ...
CLIPLINE HDFK 4 & HDFKV 4 series 2 ...
Description:
CLIPLINE HDFK 4 & HDFKV 4 series 2 piece panel mount or feed-through terminal blocks with a 0.2-6mm2 screw clamp wire termination on front and rear. HDFKV stock number 803-0576 has a vertical screw terminal connection, HDFK stock number 803-0541 ...
Designed in accordance with IEC685. Terminations marked Live, ...
Description:
Designed in accordance with IEC685. Terminations marked Live, Neutral & Earth.Conductor terminates in screw-down clampTab (0.25in) connection.
From RS PRO, this ceramic bodied non-fused terminal ...
Description:
From RS PRO, this ceramic bodied non-fused terminal block presents a reliable and cost-effective solution to wire-to-wire connections in high-temperature environments. The terminal block is direct-mount and so does not require the use of a DIN Rail. Instead, it features ...