RS PRO, 3 Way, 2.5 mm², Nylon Non-Fused Terminal Block, 400 V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

Disconnectable Terminal Block Connector, Plastic

Disconnectable terminal block connector, available in 2 and 3 pole in a choice of either brown or white. Rated at 400V, 16A
They are held securely together with the arm lock mechanism and the polarised housing prevents mismatching of the plugs

Note

Both a Socket and Plug terminal block of the same number of ways are required to construct a mated pair.

Approvals

IMQ, DEMKO, SEMKO, NEMKO, FIMKO

Plastic Two Part

Terminal blocks with a plug/socket arrangement which allow the block to be separated into two halves, isolating the plug strip without the need to remove each connection individually.

Specificaties
Kenmerk Waarde
Number of Ways 3
Fused No
Mounting Type Cable Mount
Current Rating 16A
Termination Method Screw Down
Wire Size 2.5 mm²
Colour Brown
Voltage Rating 400 V
Material Nylon
Gender Female
Maximum Operating Temperature +150°C
Contact Material Brass
Contact Plating Tin
165 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
285 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,636
(excl. BTW)
1,98
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 245
1,636 €
8,18 €
250 - 495
1,554 €
7,77 €
500 +
1,47 €
7,35 €
*prijsindicatie
Related Products
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...
High quality, industry standard terminals designed for mounting ...
Description:
High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 ...
Disconnect terminal blocks enable you to rapidly localise ...
Description:
Disconnect terminal blocks enable you to rapidly localise system faults, and permits inspection work to be carried out under zero voltage conditions. A standard height version for 2.5mm² wire, and a double-deck version for 4.0mm² wire is availableColour grey.
Protective terminal blocks for mounting on TS 35 ...
Description:
Protective terminal blocks for mounting on TS 35 type DIN Rails. The terminals feature cage clamp® technology for ultra-quick connection. • 2 conductors (1 input and 1 output)• Front-wired (four versions are available to receive wire sections 2.5 mm² to ...