RS PRO, 12 Way, 2.5 mm², Nylon Non-Fused Terminal Block, 400 V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

Nylon 6.6 Terminal Block With Wire Protection Leaf

From RS PRO, this non-fused terminal block presents a reliable and cost-effective solution to wire-to-wire connections. The terminal block is direct-mount and so does not require the use of a DIN Rail to mount. Instead, it features two mounting screws that allow mounting to any surface. This nylon terminal block can easily be cut to a required length, allowing for a highly customizable connector solution.

This RS PRO terminal block also features metallic wire protection strips that isolate the conductor from the terminal screw, for increased safety and reliability.

Features and Benefits

• M3 x 5 mm screw terminals
• Wire protection leaf
• Nylon 6.6 housing with nickel plated brass clamps

Applications

Modular terminal connectors have a wide range of applications and are a common component in electrical installations of all kinds, both domestic and industrial. The simplicity of their screw-down termination means they are particularly well suited to semi-permanent installations.

Whether for device connection to printed circuit boards or for wire-to-wire extensions, terminal blocks provide a straight forward and dependable connection solution. These non-fused terminal blocks are often used in;

• Connecting lighting to switches
• Connecting wiring to a ground
• HVAC Systems
• Power Supplies

FAQs

Q: Are these terminal blocks suitable for all environments?
A: Though terminal blocks are highly versatile, they are not the most secure of connectors, and may not be suitable for high vibration environments or applications where impact shock is a possibility.

Why RS PRO?

RS PRO strives to give you reliable parts at competitive prices. With in-house experts testing all of our RS PRO branded products, we're confident we'll satisfy your demand for quality and dependability.

RS PRO has an extensive range of electrical connector components. Whether you're operating in an industrial environment or domestic maintenance, RS PRO is with you every step of the way.

Specificaties
Kenmerk Waarde
Number of Ways 12
Fused No
Mounting Type Through Hole
Pitch 10mm
Current Rating 24A
Termination Method Screw Down
Wire Size 2.5 mm²
Voltage Rating 400 V
Material Nylon
Maximum Operating Temperature +125°C
Contact Material Brass
Contact Plating Nickel
1235 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4255 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,252
(excl. BTW)
2,725
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 245
2,252 €
11,26 €
250 - 495
2,028 €
10,14 €
500 +
1,80 €
9,00 €
*prijsindicatie
Related Products
This RS Pro fused panel mount terminal block ...
Description:
This RS Pro fused panel mount terminal block features an integrated in-line fuse holder. The white housing is made from nylon with tinned brass inserts for a screwed termination. A pull-up latch enables an easy replacement of a fuse. Inline ...
Terminal blocks with a plug/socket arrangement which allow ...
Description:
Terminal blocks with a plug/socket arrangement which allow the block to be separated into two halves, isolating the plug strip without the need to remove each connection individually. Disconnectable terminal block connector, available in 2 and 3 pole in a ...
Clear polycarbonate (PC) flame retardant housingRigid and easy ...
Description:
Clear polycarbonate (PC) flame retardant housingRigid and easy cutBrass insertsGalvanised steel screwsAll screws are captive and raised for easy wiringWorking temperature up to 85°C with a maximum of 120°C and short term (1 hour) at 130°C.
RS polyamide terminal blocks. Brass insertsGalvanised steel screwsPolyamide ...
Description:
RS polyamide terminal blocks. Brass insertsGalvanised steel screwsPolyamide (PA66) housingNatural colourSemi-rigid and low costFlame retardantHigh temperature (105°C)All screws are captive and raised for easy wiring.