RS PRO 2.54mm Pitch Spring Test Probe With Serrated Tip, 3A

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

RS Pro Spring Probe with Crosscut Head

Brought to you under the trusted RS Pro Brand, this crosscut headed spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.

The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.

The crosscut head is ideal for test lands, pads and leads. The sharp points penetrate and provide excellent electrical contact.

An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)

Features and Benefits

• Contact Resistance of 50mΩ
• Current Rating of 3A
• Gold Plated
• Spring Pressure of 1.47 N(g)

Specificaties
Kenmerk Waarde
Pitch 2.54mm
Length 24.7mm
Body Material Phosphor Bronze
Current Rating 3A
Contact Resistance 30mΩ
Probe Tip Type Serrated
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17/07/2020, met een levertijd van 1 werkdag.
Prijs Each (In a Pack of 5)
3,778
(excl. BTW)
4,571
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
3,778 €
18,89 €
25 - 45
3,498 €
17,49 €
50 - 95
3,21 €
16,05 €
100 +
2,924 €
14,62 €
*prijsindicatie
Related Products
General purpose passive probes optimised for the U1600 ...
Description:
General purpose passive probes optimised for the U1600 Series hand held oscilloscopes, superior electrical performance and high reliability.
Our Insulated Inspection Mirror is designed to offer ...
Description:
Our Insulated Inspection Mirror is designed to offer you an accurate visual check while protecting you from up to 1000 V. Featuring injection moulded Nylon 11 insulation that bonds with the tool to offer maximum protection and longer life.The unique ...
Spring-loaded terminal for fast multipoint testing of PCB ...
Description:
Spring-loaded terminal for fast multipoint testing of PCB sub-assemblies during development and production.Designed to be pressed or epoxy bonded into pre-planned test beds, aligned with the track and pins of the board to be tested.Stock No. 521-601 has a gold-plated ...
Micro probe that accepts 0.64mm socket (Stock No. ...
Description:
Micro probe that accepts 0.64mm socket (Stock No. 775-754 for adaptor leads)Tip is spring loaded and suitable for sampling extremely small measuring points and SMD components.