HARWIN Spring Test Probe

  • RS-stocknr. 261-5238
  • Fabrikantnummer S13-503
  • Fabrikant HARWIN
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS Pro Solder Receptacle for 1.27mm Pitch Spring Probe

Brought to you under the trusted RS Pro brand, this solder receptacle is designed for use with spring test probes with a 1.27 mm pitch. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.

Specificaties
Kenmerk Waarde
Length 17.75mm
Body Material Phosphor Bronze
190 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
810 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,458
(excl. BTW)
1,764
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,458 €
7,29 €
25 - 45
1,348 €
6,74 €
50 - 95
1,24 €
6,20 €
100 +
1,13 €
5,65 €
*prijsindicatie
Related Products
Premium test probe with a 4mm banana plug ...
Description:
Premium test probe with a 4mm banana plug connection which is compatible with a variety of applications. Flexible 18AWG 1.2m leadAvailable both straight and angled, both with and without plug silicone sleevingStainless steel safety test probe available.
A range of accessories for use with OM ...
Description:
A range of accessories for use with OM 16 micro-ohmmeter. Mounted on metallic rod with handle5 m cord and locking socket adapted to the OM 16 micro-ohmmeterMeasurement is taken by pressing a point (voltage reading) mounted on a spring. This ...
Pico TA061 is a low-impedance, low-capacitance probe designed ...
Description:
Pico TA061 is a low-impedance, low-capacitance probe designed for use with oscilloscopes that have 50Ω input impedance and SMA input connectors. Applications include digital communications and RF design. Narrow 2.5 mm diameter at the probe tipNew IC contact system for ...
Spring-loaded terminal for fast multipoint testing of PCB ...
Description:
Spring-loaded terminal for fast multipoint testing of PCB sub-assemblies during development and production.Designed to be pressed or epoxy bonded into pre-planned test beds, aligned with the track and pins of the board to be tested.Stock No. 521-601 has a gold-plated ...