RS PRO 1.9mm Pitch Spring Test Probe With Crosscut Tip, 3A

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: SG
Productomschrijving

RS Pro Spring Probe with Serrated Head

Brought to you under the trusted RS Pro Brand, this serrated head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.

The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.

An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)

Features and Benefits

• Contact Resistance of 50mΩ
• Current Rating of 3A
• Gold Plated
• Spring Pressure of 1.47 N(g)

Specificaties
Kenmerk Waarde
Pitch 1.9mm
Length 17.04mm
Body Material Phosphor Bronze
Current Rating 3A
Contact Resistance 30mΩ
Probe Tip Type Crosscut
370 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1060 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
3,324
(excl. BTW)
4,022
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
3,324 €
16,62 €
25 - 45
3,072 €
15,36 €
50 - 95
2,826 €
14,13 €
100 +
2,576 €
12,88 €
*prijsindicatie
Related Products
Spring loaded stainless steel needle point probe which ...
Description:
Spring loaded stainless steel needle point probe which reacts resiliently under light pressure. Especially suited to sensitive printed circuits.
A range of accessories for use with OM ...
Description:
A range of accessories for use with OM 16 micro-ohmmeter. Mounted on metallic rod with handle5 m cord and locking socket adapted to the OM 16 micro-ohmmeterMeasurement is taken by pressing a point (voltage reading) mounted on a spring. This ...
Spring-loaded terminal for fast multipoint testing of PCB ...
Description:
Spring-loaded terminal for fast multipoint testing of PCB sub-assemblies during development and production.Designed to be pressed or epoxy bonded into pre-planned test beds, aligned with the track and pins of the board to be tested.Stock No. 521-601 has a gold-plated ...
Micro probe that accepts 0.64mm socket (Stock No. ...
Description:
Micro probe that accepts 0.64mm socket (Stock No. 775-754 for adaptor leads)Tip is spring loaded and suitable for sampling extremely small measuring points and SMD components.