RS PRO 1.27mm Pitch Spring Test Probe With Point Tip, 1.5A

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS Pro Spring Probe with Pointed Head

Brought to you under the trusted RS Pro Brand, this pointed head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.

The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.

The pointed head shape is used for plated-through holes and contamination free boards. It leaves no marks or indentations.

An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)

Features and Benefits

• Contact Resistance of 50mΩ
• Current Rating of 3A
• Gold Plated
• Spring Pressure of 1.47 N(g)
• Depth: 1.8mm
• Length: 24.7mm
• Mounting Hole Size: 1.70mm
• Pitch: 2.54mm

Specificaties
Kenmerk Waarde
Pitch 1.27mm
Length 16.55mm
Body Material Phosphor Bronze
Current Rating 1.5A
Contact Resistance 70mΩ
Probe Tip Type Point
295 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
475 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
3,81
(excl. BTW)
4,61
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
3,81 €
19,05 €
25 - 45
3,526 €
17,63 €
50 - 95
3,238 €
16,19 €
100 +
2,948 €
14,74 €
*prijsindicatie
Related Products
Spring-loaded terminal for fast multipoint testing of PCB ...
Description:
Spring-loaded terminal for fast multipoint testing of PCB sub-assemblies during development and production.Designed to be pressed or epoxy bonded into pre-planned test beds, aligned with the track and pins of the board to be tested.Stock No. 521-601 has a gold-plated ...
Micro probe that accepts 0.64mm socket (Stock No. ...
Description:
Micro probe that accepts 0.64mm socket (Stock No. 775-754 for adaptor leads)Tip is spring loaded and suitable for sampling extremely small measuring points and SMD components.
Two Part Spring Probe, 1.90mm minimum pitch, Ø1.5mm ...
Description:
Two Part Spring Probe, 1.90mm minimum pitch, Ø1.5mm Convex Head.Gold finish on probe head and body.Use with receptacle / sleeve S19-501.
Two Part Spring Probe, 2.54mm (0.1") minimum pitch, ...
Description:
Two Part Spring Probe, 2.54mm (0.1") minimum pitch, Ø1.8mm Spherical Radius Head.Gold finish on probe head and body.Use with receptacle / sleeve S25-022, S25-212 or S25-512.