SUBCON-PLUS-PROFIB/PG Series, Phoenix Contact Right Angle Male Spring Terminal D-sub Connector, 9 Way, Cable Mount

Wetgeving en conformiteit
Niet conform
Land van herkomst: DE


Can be used on all Profibus systems up to 12Mbit/s
When the optional terminating resistor is switched in, the output circuit is disconnected to aid fault finding by segmenting the network
Additional connection for a programming or service device
Spring terminal or screw terminal connector technology (...SC...)
Integral strain relief
Cable entry optionally left or right (exc. PROFIB/PG and PROFIB/PG/SC2)
Programming connection optional (...PG...)
Cable entry axial (...AX...)



BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Kenmerk Waarde
Gender Male
Number of Contacts 9
Body Orientation Right Angle
Housing Material Metal Plated Plastic
Current Rating 100mA
Voltage Rating 50 V
Dimensions 60 x 49.5 x 16mm
Mounting Type Cable Mount
Depth 16mm
Length 60mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -20°C
Width 49.5mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
42,50 €
10 - 24
40,38 €
25 - 49
38,34 €
50 - 99
36,42 €
100 +
34,60 €
Related Products
These Coaxial contact inserts are for use with ...
These Coaxial contact inserts are for use with the FCI DW Series of D-Subminiature Connectors. A range of inserts that meet KNX Standard requirements.Note: the description of the inserts is given based on the central contact.
Tinned metal housing with laminated ribbing for the ...
Tinned metal housing with laminated ribbing for the shielding. Installation in KSG 183, 184 und 185 possibleIndividual contact assignment, thus also partial assignmentCompatible with all common makesCan also be applied to external tools.
A range of Crimp and Solder Contacts for ...
A range of Crimp and Solder Contacts for use in empty D-Sub Plug and Socket shells, stock no. 719-5764 typically.Discrete wire size for the Crimp Contacts is 22-30 AWG.Solder Contacts have a Ø1.15 mm blind hole for the wire.
Male and female D-Sub connectors with direct screw ...
Male and female D-Sub connectors with direct screw connectionsThese D-Sub's are all 2 Row Connectors.Easy wiring without the need for any special tool (a standard electrician's screwdriver can be used), ideal for field applicationsApplications: industry (control and automated systems), buildings ...