TE Connectivity Tap Splice Connector, Yellow, Insulated, Tin 11 → 10 AWG

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity ELECTRO-TAP Splices

ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when closed. Please see additional data table for insulation diameter and tap wire range.

Can be applied using standard pliers

Specificaties
Kenmerk Waarde
Splice Type Tap
Wire Size 11 → 10 AWG
Overall Length 17.5mm
Diameter 16.2mm
Insulation Insulated
Colour Yellow
Insulation Material Glass Filled Nylon
Contact Material Brass
Contact Plating Tin
30 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
1,918
(excl. BTW)
2,321
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,918 €
9,59 €
25 +
1,632 €
8,16 €
*prijsindicatie
Verpakkingsopties
Related Products
HIF3BA Series ID sockets and headers conform to ...
Description:
HIF3BA Series ID sockets and headers conform to MIL Specification and are intended for ribbon cable applications.Applicable wire is UL2651 AWG 28 flat cable (7//0.127mm).
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...
PIDG wire caps for use with either stripped ...
Description:
PIDG wire caps for use with either stripped or unstripped wire ends. These PIDG wire caps consist of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a ...