TE Connectivity, PIDG Butt Splice Connector, Yellow, Insulated, Tin 12 → 10 AWG

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity PIDG Closed Barrel Butt Splice

PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a copper and nylon colour coded sleeve. The copper sleeve surrounding the barrel provides improved wire insulation support after crimping allowing the wire to bend without fraying the insulation or breaking the conductor. The nylon sleeves are colour coded according to wire-size to assist with identification. Inside the PIDG splice terminal wire barrel are serrations which provide maximum contact and tensile strength after crimping. The construction of these PIDG terminals and the use of specialised tool dies allows for uniform insulation thickness under crimping pressure. This pressure is then transmitted evenly to the centre of the crimping area to produce a uniform and reliable crimp. Available with various wire and barrel sizes, these PIDG splice terminals offer a versatile solution to a wide range of wiring applications

Features & Benefits

High conductivity copper body
Copper sleeve for improved wire insulation support
Serrations in wire barrel for maximum contact and tensile strength
Colour coded sleeves for easy wire size and tooling identification
Design enables a reliable and uniform crimp

Product Application Information

These PIDG splice terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.

Approvals

UL recognised (Approvals only apply to the packs of 100, and only for those terminals marked with an asterisk).

TE Connectivity PIDG Terminals

Specificaties
Kenmerk Waarde
Splice Type Butt
Wire Size 12 → 10 AWG
Overall Length 42.06mm
Diameter 5.59mm
Insulation Insulated
Colour Yellow
Insulation Material Nylon
Series PIDG
Contact Material Copper
Contact Plating Tin
400 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2500 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,817
(excl. BTW)
0,989
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
0,817 €
81,70 €
500 - 2400
0,793 €
79,30 €
2500 - 4900
0,775 €
77,50 €
5000 - 9900
0,759 €
75,90 €
10000 +
0,743 €
74,30 €
*prijsindicatie
Related Products
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...
SOLISTRAND closed barrel parallel splices designed to terminate ...
Description:
SOLISTRAND closed barrel parallel splices designed to terminate solid and stranded wire and irregular shaped conductors. These SOLISTRAND closed barrel parallel splices are made from fine grade high conductivity copper with tin plating and have closed barrels with brazed seams ...
C100-51413. Tin-plated copperBarrel with funnel entryCopper sleeve for ...
Description:
C100-51413. Tin-plated copperBarrel with funnel entryCopper sleeve for crimping insulation giving better resistance to vibrationPolycarbonate insulation sleeveMaximum operating temperature: +105°CFlammability rating: UL94V0.