TE Connectivity D-436 Wire Splice Connector, Insulated, Tin Plated 20 → 16 AWG

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp Splices

MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is critical. MiniSeal splices consist of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve. The insulation sleeve provides environmental protection to the electrical connection against liquids such as hydraulic fluid, aviation fuel and lubrication fluids and the resulting chemical and galvanic corrosion. The heat-shrinkable sleeve also provides strain relief for the splice. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft, aerospace vehicles and similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used.

Features and Benefits

Small and lightweight design
Easy one-step installation
Immersion resistant
Environmentally sealed against liquid penetration and resulting corrosion
Suitable for use in harsh environments
MIL spec M8184/1 versions available

Applications

These MiniSeal immersion resistant crimp splices are suitable for use in harsh environments within the aerospace and defence industries

Standards

MIL-S-81824/1

Specificaties
Kenmerk Waarde
Wire Size 20 → 16 AWG
Minimum Wire Size mm² 0.53mm²
Overall Length 27.94mm
Maximum Wire Size mm² 1.34mm²
Diameter 2.79mm
Minimum Wire Size AWG 20AWG
Maximum Wire Size AWG 16AWG
Insulation Insulated
Insulation Material PVDF
Series D-436
Contact Material Copper Alloy
Contact Plating Tin
200 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1990 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
2,386
(excl. BTW)
2,887
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
2,386 €
23,86 €
50 +
2,148 €
21,48 €
*prijsindicatie
Related Products
SOLISTRAND closed barrel parallel splices designed to terminate ...
Description:
SOLISTRAND closed barrel parallel splices designed to terminate solid and stranded wire and irregular shaped conductors. These SOLISTRAND closed barrel parallel splices are made from fine grade high conductivity copper with tin plating and have closed barrels with brazed seams ...
AMPLIVAR splices terminals designed for terminating copper and/or ...
Description:
AMPLIVAR splices terminals designed for terminating copper and/or aluminium magnet wire to itself or in combination with standard solid or stranded lead wire. These AMPLIVAR wire splices are insulation displacing avoiding the need to pre-strip the wire. The wire barrel ...
SOLISTRAND STRATO-THERM high temperature parallel splice crimp terminals ...
Description:
SOLISTRAND STRATO-THERM high temperature parallel splice crimp terminals for use where operating temperatures prevent standard insulated crimps being used. These STRATO-THERM high temperature parallel splice crimp terminals are made from solid nickel and are designed to terminate sold and/or stranded ...
PLASTI-GRIP closed barrel butt splice wire crimp terminals ...
Description:
PLASTI-GRIP closed barrel butt splice wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP butt splice crimp connectors is serrated in order ...