RS PRO 1/2 AA Battery, 1/2 AA, 3.6V, Lithium Thionyl Chloride

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

PCB and Axial Mounting Lithium Thionyl Chloride Cells

Lithium Thionyl Chloride (Li-SOCl₂) battery from the RS PRO offer. This range of cells uses either 3 pins tagged connections for permanent PCB connection or axial leads for easy prototyping and mounting on various PCB connection spacings. All axial leads are 0.8mmØ and nominally 45mm in length. With an operating range from -55°C to 70°, C and resistance to wet environments are suitable to be used indoor and outdoor.

Features and Benefits:
• High voltage response, stable during most of the lifetime of the application
• Low self-discharge rate
• Ease of use
• Wide operating temperature range (from -55°C to 70°)
• Long storage and operational life (10 years)

Typical Applications:
Lithium Thionyl Chloride speciality size batteries are used in electronic devices that require a small, compact source of power. Example applications include:
• System Backups
• Real-Time Clocks
• Memory Backups
• Clock Supports
• Automotive Electronics
• Professional Electronics

FAQ’s
Are Lithium Thionyl Chloride Batteries Harmful?
Lithium Thionyl Chloride batteries can sometimes leak a substance called potassium hydroxide which is a caustic agent that can cause eye, skin and respiratory irritations. This risk is reduced by not mixing different manufacturer battery types, batteries of different chemistries and by the replacement of all batteries at the same time.
How to dispose of Lithium Thionyl Chloride Batteries?
Recycle responsibly, a wide range of schemes are available.

Safety Advice
• Keep out of sight and reach of children.
• Fire, explosion and burn hazard - Do not recharge, short circuit, crush, disassemble, heat above 100゚C (212゚F), incinerate
• Due to the high terminal voltage (3.6V), they are not suitable as direct replacements for other battery technologies in the same can sizes.
• Tagged cells have a tag arrangement of 2 - Negative, 1- Positive

Guidance:
• Always install the batteries correctly as per instruction
• Ensure that the contact points are clean and conductive
• Do not mix different types of battery
• Do not heat or attempt to recharge the battery
• Do not dispose of in a fire

Note

Tagged cells have a tag arrangement of 2 - Negative, 1- Positive. Due to the high terminal voltage 3.6V they are not suitable as replacements for other battery technologies in the same can sizes.

RS PRO 3.6V Lithium Thionyl Chloride 1/2 AA Battery

This 1/2 AA battery has 1 Ah capacity and 3.6 V nominal voltage. This battery is a non-standard size 1/2 AA battery designed for reliability in specialist low to medium current drain applications such as memory back up, clock support etc.

Approvals

Compliant with IEC 60086-4 safety standard

Specificaties
Kenmerk Waarde
Size 1/2 AA
Chemistry Lithium Thionyl Chloride
Nominal Voltage 3.6V
Capacity 1Ah
Terminal Type PCB Pin
Dimensions 14.5 x 25.4mm
283 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
851 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,38
(excl. BTW)
6,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
5,38 €
20 - 49
5,11 €
50 +
4,85 €
Related Products
Lithium TCL battery pack with snap on terminals ...
Description:
Lithium TCL battery pack with snap on terminals designed for smoke detectors, alarm & security devices and devices requiring low base currents with superimposed pulses.All cells are hermetically sealed in stainless steel cans (low magnetic signature & superior resistance to ...
Duracell industrial range of alkaline batteries have been ...
Description:
Duracell industrial range of alkaline batteries have been specifically formulated for industrial users. Supplied in larger quantities with wholesale packaging. Designed to ensure long-lasting power within various professional & industrial applications at a cost-effective price.High Performance power The batteries ...
Saft’s M 52 EX SV cell is ideally ...
Description:
Saft’s M 52 EX SV cell is ideally suited for applications requiring high energy and long operating life, with stable voltage under high discharge in - 40゚C / + 72゚C environment. The cell is certified according to ATEX and IECEx ...
Saft’s M 52 HR cell is ideally suited ...
Description:
Saft’s M 52 HR cell is ideally suited for applications requiring high discharge, continuous or pulse power with stable voltage under high discharge in - 40゚C / + 72゚C environment. Spiral constructionHermetic construction with glass-to-metal sealStainless steel containerIntegrated safety ventNon-corrosive ...