TE Connectivity PIDG FASTON .250 Series Insulated Crimp Piggyback Terminal, 6.35 x 0.81mm, 1mm² to 2.5mm², 16AWG to

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: NL
Productomschrijving

TE Connectivity PIDG Faston 250 Piggyback Receptacle Wire Crimp Terminals

PIDG (Pre-Insulated Diamond Grip) Faston 250 quick disconnect piggyback receptacle wire crimp terminals with a mating area designed for uniform reliability in the most difficult circuit environments. These PIDG piggyback wire terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a copper and nylon colour coded sleeve. The copper sleeve surrounding the barrel provides improved wire insulation support after crimping allowing the wire to bend without fraying the insulation or breaking the conductor. The nylon sleeves are colour coded according to wire-size to assist with identification. Inside the PIDG piggyback terminal wire barrel are serrations which provide maximum contact and tensile strength after crimping. The construction of these PIDG terminals and the use of specialised tool dies allows for uniform insulation thickness under crimping pressure. This pressure is then transmitted evenly to the centre of the crimping area to produce a uniform and reliable crimp. These PIDG piggyback wire terminals also feature a funnelled wire entry which prevents turned back wire strands and allows fast wire insertion during high-speed production. Available with various wire, barrel and stud sizes, these PIDG piggyback terminals offer a versatile solution to a wide range of wiring applications

Features and Benefits

High conductivity copper body
Copper sleeve for improved wire insulation support
Serrations in wire barrel for maximum contact and tensile strength
Colour coded sleeves for easy wire size and tooling identification
Funnelled wire entry for easy wire insertion
Design enables a reliable and uniform crimp

Application

These PIDG wire terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.

TE Connectivity PIDG Terminals

Specificaties
Kenmerk Waarde
Minimum Wire Size mm² 1mm²
Maximum Wire Size mm² 2.5mm²
Tab Size 6.35 x 0.81mm
Minimum Wire Size AWG 16AWG
Insulation Insulated
Maximum Wire Size AWG 14AWG
Insulation Material Nylon
Contact Plating Tin
Contact Material Phosphor Bronze
Overall Length 23.41mm
Colour Blue
Series PIDG FASTON .250
Tab Thickness 0.81mm
Tab Width 6.35mm
2500 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Box of 500)
0,555
(excl. BTW)
0,672
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
500 +
0,555 €
277,50 €
*prijsindicatie
Related Products
RS Pro range of insulated crimp spade wire ...
Description:
RS Pro range of insulated crimp spade wire terminals made from brass with a copper sleeved barrel. These crimp spade connectors have vinyl or nylon insulation with a flared design for easy wire insertion. The insulation of these spade crimp ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
RS Pro range of fully insulated heat shrink ...
Description:
RS Pro range of fully insulated heat shrink tab wire terminals made from tin plated brass. These heat shrink tab connectors have a high density PE (polyethylene) heat shrink sleeve and nylon insulation which are colour coded to correspond with ...
FASTON 250 series Ultra-Fast fully insulated flag receptacle ...
Description:
FASTON 250 series Ultra-Fast fully insulated flag receptacle crimp terminals designed to prevent shock and electrical short circuits from exposed leads. The terminals are fully protected within a V-2 type 6/6 nylon housing. When mated the crimp flag receptacle and ...