- RS-stocknr.:
- 839-5246
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 839-5246
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
KFF29 Three-Phase Fan Heater
The KFF29 is a three-phase 415V inductrial fan heater with a nominal 29kW output. It is also switchable to 9kW and a fan-only setting for cooling.
The KFF29 fan heater provides safe no-fume heating for large workshops and factory areas. Developed to give large heated air volume with an up-rated air moving system. The KFF29 is also fitted with full overheat and fan failure protection devices and utilises high specification incolloy elements giving safe reliable operation. Fitted with a thermostat as standard.
The KFF29 fan heater provides safe no-fume heating for large workshops and factory areas. Developed to give large heated air volume with an up-rated air moving system. The KFF29 is also fitted with full overheat and fan failure protection devices and utilises high specification incolloy elements giving safe reliable operation. Fitted with a thermostat as standard.
Airflow: 1200 cubic feet per minute (2040 cubic metres per hour)
Pressure generation of over 400Pa allows in excess of 10 metres of 10 inch flexible ducting to be fitted
Powerful alternative to propane
Robust construction
Quiet running
Rugged all steel design
Pressure generation of over 400Pa allows in excess of 10 metres of 10 inch flexible ducting to be fitted
Powerful alternative to propane
Robust construction
Quiet running
Rugged all steel design
Specificaties
Kenmerk | Waarde |
---|---|
Heat Type | Fan |
Maximum Output Power | 18kW |
Mounting | Portable |
Control Type | On/Off Switch, Thermostat |
Height | 570mm |
Width | 400mm |
Depth | 520mm |
Dimensions | 570 x 400 x 520mm |
Noise Level | 57dB(A) |
Air Flow | 2034m³/h |
Frequency | 50Hz |
Nominal Current | 22A |