IXYS Solid State Relay, 40 A rms Load, PCB Mount, 280 V rms ac Control
- RS-stocknr.:
- 906-1102
- Fabrikantnummer:
- CPC40055ST
- Fabrikant:
- IXYS
76 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 12,29
(excl. BTW)
€ 14,87
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 12 | € 12,29 |
| 13 - 51 | € 11,29 |
| 52 - 129 | € 10,45 |
| 130 - 259 | € 10,10 |
| 260 + | € 9,77 |
- RS-stocknr.:
- 906-1102
- Fabrikantnummer:
- CPC40055ST
- Fabrikant:
- IXYS
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- PH
Productomschrijving
Dual Power SCR Output, AC power Switch, SuperSip, CPC
These AC power solid state switches use dual power SCR outputs. Tightly controlled zero cross circuitry also ensures low noise switching of AC loads by minimizing the generation of transients. Optically coupled input and output circuits provide 2500 Vrms of isolation. This also includes noise immunity between control and load circuits. This makes them ideally suited to applications where electromagnetic interference could disrupt the operation of electromechanical relays.
The unique SuperSIP package allows these units to achieve the highest load current currently available in a similar sized package. This package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.35°C per watt.
Potential Applications:
Lighting
Programmable control
Process control
Power control Panels
Remote switching
Petrol pump electronics
Contactors
Large relays
Solenoids
Motors
Heaters
The unique SuperSIP package allows these units to achieve the highest load current currently available in a similar sized package. This package is manufactured with the silicon chip being soft soldered onto the Direct Copper Bond (DCB) substrate rather than the traditional copper lead frame. These DCB ceramics are what makes it possible to provide 2500 Vrms isolation but still offer a very low junction-to-case thermal resistance from only 0.35°C per watt.
Potential Applications:
Lighting
Programmable control
Process control
Power control Panels
Remote switching
Petrol pump electronics
Contactors
Large relays
Solenoids
Motors
Heaters
Features
Zero-cross switching
2500Vrms isolation, input to output
DC voltage control, AC output
Optically isolated
Low EMI and RFI generation
High noise immunity
Machine insertable, wave solderable
Zero-cross switching
2500Vrms isolation, input to output
DC voltage control, AC output
Optically isolated
Low EMI and RFI generation
High noise immunity
Machine insertable, wave solderable
Standards
UL 508 Recognized Component: File E69938
Ixys Solid State Relays, PCB Mount
Specificaties
Kenmerk | Waarde |
|---|---|
| Maximum Load Current | 40 A rms |
| Mounting Type | PCB Mount |
| Maximum Control Voltage | 280 V rms ac |
| Minimum Control Voltage | 20 V rms ac |
| Switching Type | AC |
| Control Voltage Range | 20 → 280 V rms ac |
| Minimum Load Current | 0.1 A rms |
| Number of Poles | 1 |
| Terminal Type | PCB Pin |
| Contact Configuration | SP-NC |
| Output Device | Power Switch |
| Relay Type | Power Relay |
| Package Style | Super SIP |
| Maximum Turn On Time | 0.5 cycles |
| Dimensions | 38.1 x 3.807 x 17.78mm |
| Maximum Operating Temperature | +85°C |
| Capacitance | 3pF |
| Minimum Operating Temperature | -40°C |
| Standards Met | E3 Certificate, UL 508 Approved File No E69938, UL Recognized |
| Special Features | AC Output, DC Control, High Noise Immunity, Low EMI and RFI Generation, Machine Insertable, Optically Isolated, TTL & CMOS Compatible, Wave Solderable, Zero Crossing Switching |
| Operating Temperature Range | -40 → +85°C |
| Length | 38.1mm |
| Off State Leakage Current | 100 μA |
| Height | 17.8mm |
| Depth | 3.8mm |