Omron 3 A SPNO Solid State Relay, DC, DIN Rail, MOSFET, 26.4 V dc Maximum Load

  • RS-stocknr. 111-3010
  • Fabrikantnummer G3RV-SR500-D DC24
  • Fabrikant Omron
Wetgeving en conformiteit
Land van herkomst: JP

G3RV-SR Slim I/O Solid State Relay

Omron G3RV-SR slim I/O solid state relays are part of the Value Design for Panel range from Omron that takes control panel design and manufacturing to a new level. The G3RV-SR relays allow installation with either top or bottom facing up for a flexible panel design. This flexible design allows efficient wiring inside panels. Push-In Plus terminal blocks are used to save wiring work in comparison with conventional screw terminals.

High frequency
High-speed opening and closing
Switching capacity up to 3 A (DC), and 2 A (AC).
LED operating status

G3RV-SR500-D DC24– I/O Low Profile SSR - Solid State Relay 6.2 mm Wide.

This I/O SSR-Solid state relay has a lower profile up to 25% of other standard SSR allowing further downsizing of the control panel. An optimal slim design relay that includes high frequency and high speed opening and closing of the SSR –solid state relay.

Features and Benefits G3RV-SR500-D DC24 I/O Slim SSR – Solid State Relay.

• Push-In Plus terminal.
• Release lever for easy relay locking and release.
• 60% Reduced wiring time.
• DC Applicable output load.
• Rated input voltage 24 V dc.
• Slim compact design.
• DC output – MOS FET.
• High frequency.
• High speed opening and closing.
• Easy wiring.

SSR – Solid State Relay Input Rating at ambient 25°C.

• Rated current 4.6 mA.
• Must operate voltage 21.6 V max.
• Must release voltage 1 V min.
• Input voltage ±10% of rated voltage.

SSR – Solid State Relay Output.

• Rated load voltage 5 to 24 V dc.
• Load voltage range 3 to 26.4 V dc.
• Load current 100 μA to 3 A at an ambient 25°C.
• Inrush current resistance 30 A, 60 hZ, 1 cycle.
• Applicable load capacity 72 W, output voltage 34 V dc.

Additional Features of G3RV-SR500-D DC24 SSR – Solid State Relay.

• Operate time 6 ms max.
• Release time 60 ms max.
• Output ON resistance 0.3 Ω max at 24 v dc.
• Leaked current 10 μA max at 24 V dc.
• Vibration resistance – malfunction 10 to 55 to 10 Hz double amplitude.
• Shock resistance 300 m/s².
• Ambient operating temperature -30°C to +55°C.
• Relay weight 38 g.
• IP 20
• Load category DC-12.
• Rated insulation voltage 240 V.

Suitable SSR – Solid State DIN Rails.

• Part number PFP-100N – 1 m DIN relay, Stock number 8278403.
• Part number PFP-50N – 0.5 m DIN relay, Stock number 8278400.

Suitable End Plate for the SSR –Solid State Relay.

• Part number PFP-M, stock number 8278419.

Suitable Spacer Plate for the SSR- Solid State Relay.

• Part number PFP-S, Stock number 8278412.


UL 508, E64562. CE.

Zero Voltage Relays


Temperature can affect current rating; please consult the data sheet for potential derating.

Kenmerk Waarde
Minimum Load Current 100 μA
Maximum Load Current 3 A
Mounting Type DIN Rail
Series G3RV-SR
Minimum Load Voltage 3 V dc
Maximum Load Voltage 26.4 V dc
Maximum Control Voltage 24 V dc
Switching Type DC
Contact Configuration SPNO
Terminal Type Push In
Output Device MOSFET
Maximum Turn On Time 6 ms
Dimensions 6.2 x 78 x 90mm
Standards Met CE, CULus, TUV Certification
Load Voltage Range 3 → 26.4V dc
Control Voltage Range Maximum of 24 V dc
Special Features High-Speed Opening and Closing SSR, Lower Profile than Conventional Products
Operating Temperature Range -30 → +55°C
Length 6.2mm
Off State Leakage Current 10 μA
Height 90mm
Number of Poles 1
Relay Type Solid State Relay
Depth 78mm
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
66 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
32,51 €
Related Products
RS Pro SD06 series solid state relays offer ...
RS Pro SD06 series solid state relays offer a compact solution without compromising on performance or reliability. Available with a wide range of input and output options in a slim 11mm width package. 6A Max load currentAC and DC load ...
PLC-INTERFACE with electronic PDT contact, consisting of PLC-BPT.../21 ...
PLC-INTERFACE with electronic PDT contact, consisting of PLC-BPT.../21 basic terminal block with push-in connection and integrated miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input: 24 V DC, output: 3 - 48 V DC/500 mA.
Relay terminals for interfacing digital control signals exchanged ...
Relay terminals for interfacing digital control signals exchanged in automation equipment between a PLC and other components.The input interface is adapted for switching the input signals, the output interfaces for pre-actuator controlDisplay leds for input status. Screw connectionDIN rail mounting. ...
10mm single channel DIN rail mount SSR assemblyDC ...
10mm single channel DIN rail mount SSR assemblyDC ratings 60 VDC and 3 A3-32 Vdc controlCage style screw terminals for easy connectionFits standard 35mm DIN rail.