for use with Measuring Relay

  • RS-stocknr. 181-2786
  • Fabrikantnummer MK5130N
  • Fabrikant Dold
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

3-phsase noise filter for measuring relays
Noise suppression of wire bound interference
Broadband suppression of high frequencies
For nominal voltages up to 3 AC 1000 V
PE connection for increased suppression level
2 models available:
MK 5130N: depth 97 mm
LG 5130: depth 121 mm
Width:22.5 mm
Applications
Operation of measuring relays on inverters and equipment with high frequency noise voltage
Noise suppression for circuits and loads up to 50 mA per phase
Reduction of noise created by electric tools, contactors and luminescent lamps

Specificaties
Kenmerk Waarde
For Use With Measuring Relay
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
98,12
(excl. BTW)
118,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
98,12 €
Related Products
Crydom HS series heat sinks for use with ...
Description:
Crydom HS series heat sinks for use with single phase and 3 phase solid state relays. With a wide range of thermal impedance values to suit various applications. These heat sinks are suitable for mounting up to 3 solid state ...
Range of SMD hybrid technology synchronous solid state ...
Description:
Range of SMD hybrid technology synchronous solid state power relays (close at 0 voltage, open at 0 current: resistive load), low leakage current, silent and with unlimited number of operations.Applications: furnaces, extruders, presses, heating, motor control, solenoids, brakes, home automation, ...
Asynchronous solid state relays for highly inductive loads, ...
Description:
Asynchronous solid state relays for highly inductive loads, AC-53 motors and applications with phase angle regulators.Voltage protection for input (transil) as well as output (RC + VDR) for very high immunity to interference.Wide control range: 3 → 32 Vdc with ...
The Avago Technologies’ Photo MOSFET Solid State Relay ...
Description:
The Avago Technologies’ Photo MOSFET Solid State Relay family consists of an infrared light-emitting diode (LED) and the detector which consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs.