Burkert Solenoid Valve 93970038, 2 port , NC, 110 V, 1/2in

  • RS-stocknr. 804-2037
  • Fabrikantnummer 93970038
  • Fabrikant Burkert
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DS6213-EV Series 2/2 Stainless Steel Solenoid valves

Burkerts new range of 2 way normally closed solenoid valves. Manufactured from stainless steel and designed for use with water and inert liquids and gases. A soft mechanical coupling between the main piston and pilot armature aids smooth operation and a precision engineered main body path helps ensure quiet, water hammer free operation.
Suitable for a diverse range of applications including compressed air and vacuum systems, heating and refrigeration, water treatment and swimming pool technology. Compact size to aid installation when space is limited

0-10 bar operating pressure
0.1-4 second response time
Opens without differential pressure
Minimum pressure differential of 0.5 bar for full opening
High flow rate
Sealed coil
IP65 Rating

Note

Due to their internal complexity these valves can only be used with clean neutral media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specificaties
Kenmerk Waarde
Supply Voltage 110 V
Number of Ports 2
Operation Pilot
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Air, Gas, Vacuum Applications
Type 2/2
Orifice Diameter 13mm
Body Material Brass, Nickel Plated Brass, Stainless Steel
Maximum Working Pressure 10 bar
Operating Temperature Range -30 → +100 Epoxy Coil (EPDM) °C, -30 → +90 Polyamide Coil (EPDM) °C, -10 → +80 (NBR) °C, 0 → +120 Epoxy Coil (FKM) °C, 0 → +90 Polyamide Coil (FKM) °C
Minimum Operating Temperature -30 °C, -10 °C, 0 °C
Maximum Operating Temperature +80 °C, +90 °C, +100 °C, +120 °C
Maximum Closing Time 4s
Thread Standard or Connection Type G
Series 221
Connection Gender Female
Maximum Opening Time 4s
Servo Assist Yes
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
167,75
(excl. BTW)
202,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
167,75 €
Related Products
Two-way, pilot operated solenoid valves for hot water/steam ...
Description:
Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection. Brass bodyCompact design to minimize heat radiation lossDIN plug connection Ranging from -20 to +184°CCan be mounted in any position.
Two-way, brass-bodied WRAS listed solenoid valves with anti-water ...
Description:
Two-way, brass-bodied WRAS listed solenoid valves with anti-water hammer devices fitted as standard. They have a zero bar minimum operating pressure and are normally closed. The compact, lightweight unit may be mounted in any position (however, for optimum life, certain ...
Two-way pilot operated solenoid valves with zero bar ...
Description:
Two-way pilot operated solenoid valves with zero bar minimum operating pressure, normally open with threaded port connection. Brass bodyPressure not required for operationCompact & lightweightDIN plug connectionCan be mounted in any position.
Two-way, pilot operated solenoid valves, minimum operating pressure ...
Description:
Two-way, pilot operated solenoid valves, minimum operating pressure required, normally closed with threaded port connection. Brass bodyMinimum operating pressure requiredCompact & lightweightDIN plug connection Ranging from -20 to +85°CCan be mounted in any position.