Burkert Solenoid Valve 93970027, 2 port , NC, 230 V ac, 1-1/4 in

  • RS-stocknr. 804-2002
  • Fabrikantnummer 93970027
  • Fabrikant Burkert
Wetgeving en conformiteit
Land van herkomst: DE

DS6213-EV Series 2/2 Brass Solenoid valve

Burkerts new range of 2 way normally closed solenoid valves. Manufactured from brass and designed for use with water and inert liquids and gases. A soft mechanical coupling between the main piston and pilot armature aids smooth operation and a precision engineered main body path helps ensure quiet, water hammer free operation.
Suitable for a diverse range of applications including compressed air and vacuum systems, heating and refrigeration, water treatment and swimming pool technology. Compact size to aid installation when space is limited

0-10 bar operating pressure
0.1-4 second response time
Opens without differential pressure
Minimum pressure differential of 0.5 bar for full opening
High flow rate
Sealed coil
IP65 Rating


Due to their internal complexity these valves can only be used with clean neutral media
Electrical connector can be ordered separately

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Kenmerk Waarde
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 1-1/4 in G Female
Connection Size 1-1/4 in
Default Valve Position NC
Suitable Applications Liquid
Type 2/2
Orifice Diameter 25mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +80 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +80°C
Series 221
Servo Assist Yes
Connection Gender Female
Flow Factor Kv 11m³/h
Thread Standard or Connection Type G
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
185,06 €
Related Products
Solenoid valves with pivoted armatures which provide high ...
Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids. BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in 90° incrementsZero head pressure capabilityLockable manual ...
The Burkert 0124 series 1/4in G female solenoid ...
The Burkert 0124 series 1/4in G female solenoid valve has a supply voltage rating of 230VAC. This 3-port NO/NC position valve is made of PP material for aggressive media. This direct-acting solenoid valve with separating diaphragm has a pivoted armature ...
Two-way, pilot operated solenoid valves for hot water/steam ...
Two-way, pilot operated solenoid valves for hot water/steam applications, normally closed with threaded port connection. Brass bodyCompact design to minimize heat radiation lossDIN plug connection Ranging from -20 to +184°CCan be mounted in any position.
Two-way, normally closed, condensate drain valve assembly with ...
Two-way, normally closed, condensate drain valve assembly with electronic timer. Condensate Drain Valves are ideally suited to be used with compressors, are compact and lightweight, and offer adjustable on and off periods. Timer designed for automatic control of condensate draining ...