AZM 161 Solenoid Interlock Switch Power to Lock 24 V ac/dc
- RS-stocknr. 617-5087
- Fabrikantnummer AZM 161SK-12/12RKA-024
- Fabrikant Schmersal
Schmersal Solenoid Interlock Switch
The Schmersal AZM161 series power to lock interlock solenoid switch has a power supply voltage rating of 24VAC/DC with 4NC safety and 2NO auxiliary contact configuration. It has double-insulated thermoplastic enclosures with screw terminals.
Note:
Actuating key is not included, see accessories. Interlocks with power to lock should only be used after a thorough evaluation of the risk as the guarding device can immediately be opened in an event of failure of electrical power supply or when the main switch is opened.
Caution:
EN60947-5-1 standard is only met if the entire system consisting of a safety sensor (AZM161), magnet (AZM) and a safety monitoring module (AES) is used.
Features and Benefits
Interlock with protection against incorrect locking
Long life
Large wiring compartment
Manual release
Cable entries of 4M16 x 1.5
Certifications
IP67 rated
BG certified
UL listed
CSA certified
IEC/EN60947-5-1
BG-GS-ET-19
CCC certified
EAC certified
Approvals
BG, UL, CSA
| Kenmerk | Waarde |
|---|---|
| Series | AZM 161 |
| Power to Lock / Unlock | Power to Lock |
| Actuator Included | No |
| Actuator Type | Various Options |
| Conduit Entry | M16 |
| Length | 90mm |
| Width | 30mm |
| Depth | 130mm |
| Supply Voltage | 24 V ac/dc |
| Housing Material | Plastic |
| Dimensions | 90 x 30 x 130 mm |
| Auxiliary Contacts | 2NO |
| Safety Contacts | 4NC |
| IP Rating | IP67 |
