440G-T Solenoid Interlock Switch Power to Lock 24 V ac/dc

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving
//media.rs-online.com/t_line/L351399-01.gif
//media.rs-online.com/t_line/L357917-01.gif

Allen Bradley Guardmaster Guard Locking Switch

The Allen Bradley Guardmaster TLS-GD2 series positive mode, tongue operated guard locking interlock switch locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. This switch has three safety (NC) contacts and two auxiliary (NO) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. It is provided with a blanking plug to seal the unused slot. It has a power-to-lock function, also has five sets of contacts of various forms and is suitable for use with PLCs.

Note:
Actuator is not supplied and must be ordered separately
.
Incorporates a power-to-unlock function

Warning:
With the “power to lock” function, provisions are required to ensure that a dangerous situation cannot result from open circuit faults or power cuts.

Features and Benefits

The supply voltage is 24VAC/DC

Power-to-lock
High locking force of 2000N (450lb)
Five contacts are 2NC and 1NO for door position monitoring, 1NC and 1NO
for lock monitoring
Rotatable head and four possible actuator entry positions
Lid mounted status indication
Three manual release points with security screws for use in the event of an emergency
Suitable for high-pressure, high temperature and wash down
Key release lids available for unlocking the locking mechanism in emergencies
Rated insulation voltage is 500V
Thermal current is 10A
Conduit entry is M20

Certifications

EN954-1
ISO13849-1
IEC/EN60204-1
NFPA79
EN1088
ISO14119
IEC/ EN60947-5-1
ANSI B11.19, AS4024
CE certified
UL approved
cULus approved
TUV certified
CCC certified
IP69K rated

Specificaties
Kenmerk Waarde
Range TLS-2-GD2
Series 440G-T
Power to Lock / Unlock Power to Lock
Conduit Entry M20
Length 126mm
Width 86mm
Depth 33mm
Supply Voltage 24 V ac/dc
Safety Contacts 2NC
Auxiliary Contacts NO
Housing Material Plastic
Dimensions 39 x 86 x 126 mm
IP Rating IP66, IP67, IP69K
67 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
127 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
220,00
(excl. BTW)
266,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
220,00 €
Related Products
Featuring soldered-in remanence miniature switching relays, these units ...
Description:
Featuring soldered-in remanence miniature switching relays, these units have a variety of contact configurations such as SPDT, DPDT, and SPNO. Some feature integrated NPN transistor control, for low control currents whilst all are mountable on DIN rail NS 35/7.5. Phoenix ...
Sine wave output voltageSelectable output frequency: 50/60HzHigh input-output ...
Description:
Sine wave output voltageSelectable output frequency: 50/60HzHigh input-output isolation 3000VrmsThree-phase synchronizationRemote inhibitInput and output alarm Railway version EN50155Fire and smoke: EN45545-2 approvedDNV GL maritime type aproved product.
The Schneider Harmony XVPC series is a visual ...
Description:
The Schneider Harmony XVPC series is a visual and audible signalling tower used for indicating the various states of operation for a device or installation, such as: start, stop machine, no material, call technical staff, and fault signalling.These signal towers ...
SCALANCE access points with three built-in radio interfacesFor ...
Description:
SCALANCE access points with three built-in radio interfacesFor designing Industrial Wireless LAN (IWLAN) radio networksReliable communicationEncryption protects against unauthorized accessSuitable for mounting outdoorsAPEX approved.