Weller WR 2000D Soldering Station, 230V

  • RS-stocknr. 719-2604
  • Fabrikantnummer T0053379699N
  • Fabrikant Weller
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Weller WR 2000D Soldering Station Set

Introducing the WR 2000D from Weller, the 300W rework station uses two channels to support two different tools. It's the perfect solution for all your soldering, desoldering jobs, with an automatic tool recognition. The WR 2 provides versatility and is compatible with a wide range of tips and accessories, also with two integrated pumps. The pumps allow the system to be independent of separate compressed air supply.

The WR 2000D rework station includes a power unit, a desoldering iron, and a soldering iron rest.

What's included?

  • WR 2 300W Power Unit

  • DSX 80 Desoldering Iron

  • WDH 30 Soldering Iron Rest

Power Unit

The WR 2 from Weller is a digitally controlled soldering station using an LCD display, that can easily track the temperatures for the tools selected. The station supports two tools up to 300W. This allows you to use two tools simultaneously and with its automatic tool recognition to avoid any delay in your work. This soldering station features an ECO button. With one push of the ECO button, the temperature will drop down to the power-saving standby mode. The WR 2 control unit has an integrated mini USB port for data logging etc.

The WR 2 power unit has a temperature range is from 50°C to 550°C (122°F to 932°F), offering a great deal of flexibility for various soldering applications. The Weller WR 2 soldering station is ESD protected and offers a temperature accuracy of ±9°C. There is a 3.5mm jack plug and socket on the back of the soldering unit for equipotential bonding. Equipotential bonding enables you to be ESD safe by joining metalwork that may be earthed, to avoid any potential malfunctions from ESD.

Desoldering Iron

The DSX 80 desoldering iron is a high-performing and ergonomic iron that is capable for the most desoldering applications. An integrated collector stores the extract solder and a Kapton ribbon allows you to safely change the tube. A small finger switch controls the vacuum pump for solder extraction. The DSX 80 takes approximately 80 seconds to heat up to the operating temperature, which can be as high as 450°C.

Soldering Iron Rest

The Weller WDH 30 soldering iron rest is an ideal place to keep the soldering, desoldering and hot air iron when not in use. Supplied with brass metal wool for dry tip cleaning, integrated into the stand.

Features and Benefits

  • Temperature accuracy of ±9°C

  • 300 W Power station for high-level productivity

  • Supports two separate tools

  • Automatic tool recognition

  • Features digital display for easy temperature readings

  • ECO mode enables power saving

  • Integrated solder collector

  • Heavy-duty stand with integrated tip cleaner

  • ESD Protected

  • EU Plug and UK Plugs

Typical Applications

Soldering stations and soldering iron are used to work and rework solder in all manner of applications, particularly in repairing or building PCB circuit boards with SMD and through-hole components. They are commonly used in electronic prototyping and production, and any application where a circuit board component might have to be removed or adjusted. Soldering irons are often used by:

  • Engineers

  • Electricians

  • Metalworkers

  • Jewellers

  • Home inventors

FAQ's

Does it display in Centigrade or Fahrenheit?

This solder station only shows Centigrade (°C). The temperature range is from 50°C to 550°C (122°F to 932°F).

What plug does the Weller WR 2000D use?

This soldering station has both UK and EU plug adapters.

Note

Not suitable for use with Wellers Micro-Tools range.
Please be aware solder wire is not included with this Soldering Station. Why not try RS brand Solder wire? 756-8884

Supplied with

DSX 80 Desoldering iron (80W, 50 → 450°C), DX 113HM Nozzle & WSH 30 Safety rest.

De-Soldering - Weller

Specificaties
Kenmerk Waarde
Model Number WR 2000D
Plug Type Type F - Schuko plug, Type G - British 3-pin
Tasks Supported Desoldering
Wattage 300W
Input Voltage 230V
Soldering Tip Temperature 550°C
Number of Outputs 2
Display Type LCD
ESD Safe Yes
Sorry, we konden onze voorraadniveaus nu niet controleren. Probeer de pagina te vernieuwen.
Prijs Each
1.214,00
(excl. BTW)
1.468,94
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.214,00 €
Related Products
Extremely powerful infrared pre-heating plate with small dimensionsPre-heating ...
Description:
Extremely powerful infrared pre-heating plate with small dimensionsPre-heating zone, designed especially for working on small PCBs, universal useControlled, fast and consistent infrared heating of medium wavelengthDigital control electronics and temperature displayPCB holder attached directly to the heating ...
This popular WXHP 120 Preheating Plate from Weller ...
Description:
This popular WXHP 120 Preheating Plate from Weller is high-powered, solving multi-layer and high mass soldering application issues. Preheat plate requires only a small area of work bench spaceEffective heat transfer means minimal energy lossIts closed-loop temperature control provides the ...
The WP120 Soldering iron is designed with power ...
Description:
The WP120 Soldering iron is designed with power response heating technology with improved sensor position especially for use in applications that require high energy and precision solder work. This soldering iron provides you with maximum power in a small ergonomic ...
Temperature controlledFitted with PT7 –LT adapter and LTM ...
Description:
Temperature controlledFitted with PT7 –LT adapter and LTM 3.2 mm chisel bit24Vac version, 660-185, fitted with a Bulgin plug, RS (488-393), a suitable socket is RS (488-400)This iron operates from 24Vac, i.e. from a transformer. No station is required. These ...